What to Look for When Buying Used Chick Workholding
Chick workholding systems are precision-manufactured in the USA with hardened steel components, patented chip-sealing designs, and the QwikChange snap-on jaw interface. Here is what to evaluate on used units.
Inspect the QwikChange interface surfaces. The QwikChange snap-on/off mechanism relies on precision-machined jaw towers and mating jaw profiles. Check tower surfaces for wear, burring, or chip damage that could affect jaw seating. Verify that moveable jaws snap on and off cleanly with positive engagement. On Qwik-Lok and Multi-Lok systems, test every jaw station for consistent QwikChange function.
Test the clamping mechanism and drive screw. Cycle the vise through full open and close travel. The swivel handle should drive smoothly with consistent clamping force. On the One-Lok, verify that the sliding locking mechanism positions the moveable jaw quickly and locks securely. Check the drive screw for wear or backlash that could reduce clamping repeatability.
Verify the base and mounting system. On Qwik-Lok and One-Lok vises, check the base for flatness, cracks, or damage to toe clamp rails. On Multi-Lok tombstones, inspect all faces for flatness and verify that the column mounts squarely to the baseplate. Check round and diamond locating pin bores for wear, as these provide the repeatable positioning critical to the system.
Check foundation plates and accessories. Foundation plates should be flat with undamaged grid holes and chip plugs intact. Check faceplates and carriers for interface wear.
Chick One-Lok CNC Vise
The One-Lok is Chick's single-station vise for CNC machining centers, delivering up to 10,000 pounds of clamping force. The BoltFast jaw system allows hard jaw and machinable soft jaw changes with a partial turn of two setscrews using a T-wrench, completing jaw swaps in seconds. The sealed, solid base eliminates the valley where chips and coolant collect in conventional vises. Pilot holes in the underside enable pin location on the machine table. Toe clamp rails along both sides allow fast mounting and repositioning without removing the vise from the table. The One-Lok is available in a 6-inch jaw width with 8 inches of maximum jaw opening.
Chick Qwik-Lok Dual-Station Vise
The Qwik-Lok is Chick's signature product and the foundation of the System 5 platform. Available in 1040 (4-inch) and 1550 (6-inch) sizes, the Qwik-Lok uses three jaws to clamp two parts simultaneously, doubling output per cycle. QwikChange moveable jaws snap on and off in seconds. Jaw options include standard hard jaws, machinable aluminum soft jaws for custom part profiles, high jaws, wide jaws, oversized jaws, and single-station jaw sets for larger parts. QwikChange faceplates convert the Qwik-Lok into a manual pallet system by accepting custom-machined fixtures that swap in and out of the vise body.
Chick Multi-Lok Tombstone Systems
The Multi-Lok extends QwikChange workholding to horizontal machining centers in 4, 6, 8, and 12-sided tombstone configurations. Each face holds a dual or single-station QwikChange jaw set, enabling multi-part machining across multiple faces in a single pallet cycle. Multi-Loks mount to baseplates with round and diamond pin location for repeatable positioning. Specialty Multi-Loks serve both small-part and large-part applications. Multi-Lok setups reduce changeover time by up to 80% compared to conventional tombstone fixturing.
Chick ISS, AnchorLOK & Accessories
The Indexer Subsystem (ISS) combines a Multi-Lok with a 4th-axis rotary table, converting a vertical machining center to operate like a horizontal with multi-side machining capability. AnchorLOK provides a rigid, repeatable QwikChange platform for palletized fixturing across horizontal, vertical, and 5-axis machines. Foundation plates feature custom-designed 50 mm grid patterns with chip plugs for consistent system mounting. Additional accessories include grippers for extra clamping power, chip covers for sealed operation, and third-hand mechanisms for part positioning.
How to Sell Your Used Chick Workholding
Chick workholding systems hold strong resale value thanks to US manufacturing quality, the universal QwikChange interface, and consistent demand from CNC job shops and production manufacturers. Qwik-Lok 1550 vises, Multi-Lok tombstone systems, and complete System 5 packages with foundation plates are in particularly high demand.
Resell CNC buys used Chick workholding in any quantity, any product type, nationwide.
- Contact us — call (844) 478-8181 or email sales@resellcnc.com.
- Free appraisal within 24 hours, no obligation.
- Accept the offer — we handle packaging, shipping, and logistics.
Frequently Asked Questions About Used Chick Workholding
Is used Chick workholding reliable?
Yes. Chick Workholding Solutions has manufactured precision workholding in the USA since 1989. The System 5 platform uses hardened steel components, patented chip-sealing designs, and the QwikChange interface. Used Chick systems with clean, undamaged interface surfaces continue to perform to original specifications.
What is the QwikChange system?
QwikChange is Chick's proprietary snap-on/off jaw interface that allows moveable jaws to be swapped in seconds without tools. The interface is universal across all Chick products, meaning jaws and faceplates move between One-Lok vises, Qwik-Lok systems, Multi-Lok tombstones, and AnchorLOK fixtures.
What should I inspect before buying used Chick equipment?
Check QwikChange jaw tower surfaces for wear or damage. Test clamping mechanism and drive screw for smooth operation. Verify base flatness and locating pin bore condition. On Multi-Loks, confirm all faces are flat and the column mounts squarely to the baseplate.
What Chick products fit my CNC machine?
Chick designs workholding packages for specific machining center models from all major builders. Foundation plates are custom-sized to your machine table. Contact Resell CNC at (844) 478-8181 to match used Chick equipment to your machine.
What Chick products hold their value best?
Qwik-Lok 1550 dual-station vises and Multi-Lok tombstone systems maintain the strongest resale values due to versatility and broad demand. Complete System 5 packages with foundation plates and jaw sets command premiums. Call (844) 478-8181 for current valuations.
Does Resell CNC offer financing on used Chick equipment?
Yes. Resell CNC offers flexible financing options to help your business acquire the equipment it needs. Contact us at (844) 478-8181 to discuss terms.
How do I sell my used Chick workholding?
Contact Resell CNC at (844) 478-8181 or sales@resellcnc.com. We buy all Chick products nationwide, from individual vises and jaw sets through complete Multi-Lok and System 5 packages. Free appraisal within 24 hours.