What to Look for When Buying a Used Euromac
Euromac machines are built for high-speed sheet metal punching, notching, and bending. Italian engineering and compact design make them popular in job shops and contract fabrication. Here is what to inspect on used units.
On turret punch presses, check the turret stations, ram, and drive system. Inspect each station for alignment and wear. On servo-electric models (MTX Flex), verify smooth ram response across the full stroke. Cycle through all positions and confirm accurate indexing. Look for slug buildup or scoring on die plates.
On hydraulic punch presses, verify cylinder condition and frame integrity. Check the cylinder for consistent pressure and smooth operation. Inspect ram gibs for wear. On CX-series machines, test punching force at rated tonnage and confirm the power unit holds stable pressure without excessive heat or leakage. Examine the frame and throat for cracking.
On notching machines, inspect blade condition and angle accuracy. Verify blades are sharp and free of chips or uneven wear. On variable angle notchers, test the adjustment mechanism across its full range. Check hold-down clamps and verify clean cuts at rated capacity.
On press brakes, check the ram, backgauge, and bed alignment. Verify ram parallelism across the full bed length. On Digibend CNC models, test backgauge positioning and repeatability. Inspect tooling mounting surfaces for wear. Cycle through multiple bends and confirm consistent angle accuracy.
Euromac CNC Turret Punch Presses
MTX Flex Series
The MTX Flex is Euromac's top-of-the-line CNC turret punch press with servo-electric drive for fast, energy-efficient punching. It handles sheets up to 1250 x 2500 mm at rates exceeding 300 hits per minute. Multi-tool capability allows multiple punch shapes in a single station, reducing setup time. The servo-electric drive eliminates hydraulic oil, lowering maintenance costs.
BX Series
The BX series CNC turret punch presses offer a versatile mid-range platform with hydraulic punching and Euromac CNC control. Available in multiple tonnage and sheet size configurations, BX machines handle punching, forming, louver cutting, and tapping. The BX series is common on the used market and a strong value for shops entering CNC punching.
STX Series
The STX series delivers CNC turret punching in a compact footprint for shops with limited floor space. STX machines share core turret and tooling architecture with the BX platform, well suited for short-run production and job shop work.
Euromac Hydraulic Punch Presses
CX Series
The CX series (including the CX 1000) provides single-station hydraulic punching for heavy-gauge sheet metal and structural fabrication. CX machines deliver high tonnage in a compact frame, ideal for thick material, large-diameter holes, and cluster patterns. The CX 1000 is frequently found on the used market.
Euromac Notching Machines
Euromac manufactures a full range of notching machines for sheet metal corner preparation. Fixed 90-degree notchers handle standard box and enclosure work. Variable angle machines allow adjustable notch angles for custom fabrication. Hydraulic notchers in the 220 and 250 series provide clean, high-force notching for heavier gauges. Euromac notchers are widely used in HVAC, electrical panel, and general fabrication shops.
Euromac Press Brakes
Digibend Series
The Digibend CNC press brakes feature digital backgauge control, fast setup, and consistent bending accuracy. Available in multiple tonnage and bed length configurations, the Digibend complements Euromac punching equipment in a complete fabrication cell.
FX Bend Series
The FX Bend hydraulic press brakes provide reliable bending for general sheet metal work with manual or NC backgauge control.
How to Sell Your Used Euromac
Euromac machines hold solid resale value thanks to Italian build quality and a strong reputation in sheet metal fabrication. Turret punch presses (MTX Flex, BX series) and CX hydraulic presses see consistent demand.
Resell CNC buys used Euromac machines: every model, every generation, nationwide.
- Contact us at (844) 478-8181 or sales@resellcnc.com.
- Free appraisal within 24 hours, no obligation.
- Accept the offer and we handle rigging, transport, and logistics.
Frequently Asked Questions About Used Euromac Machines
Are used Euromac machines reliable?
Yes. Euromac machines are manufactured in Italy with a focus on precision, durability, and low maintenance. The servo-electric drive in the MTX Flex further reduces wear on mechanical components.
What CNC control does Euromac use?
Euromac equips its CNC turret punch presses and Digibend press brakes with proprietary controls built for punching and bending. These controls offer intuitive programming, tool management, and nesting software integration.
What should I inspect before buying a used Euromac?
On turret punch presses, check turret indexing, ram stroke consistency, and tool station condition. On hydraulic machines, verify cylinder performance and check for oil leaks. On notchers, inspect blade sharpness and angle accuracy. On press brakes, test ram parallelism and backgauge repeatability. Request maintenance records and cycle count if available.
What Euromac models hold their value best?
The MTX Flex commands the strongest resale value due to its servo-electric technology and production capability. BX-series turret punches and CX hydraulic presses also maintain solid demand. Call (844) 478-8181 for current valuations.
Where are Euromac machines manufactured?
All Euromac machines are designed and manufactured in Zanè (Vicenza), Italy with full in-house production from engineering through assembly and testing.
What industries use Euromac machines?
Euromac equipment is used across sheet metal fabrication, HVAC ductwork, electrical enclosure production, signage, automotive components, and general contract fabrication.
Does Resell CNC offer financing on used Euromac machines?
Yes. Resell CNC offers flexible financing options on used equipment. Contact us at (844) 478-8181 to discuss terms.
How do I sell my used Euromac?
Contact Resell CNC at (844) 478-8181 or sales@resellcnc.com. We buy every Euromac model nationwide. Free appraisal within 24 hours.