What to Look for When Buying a Used Eurotech
Eurotech machines are built with Italian precision engineering and heavy cast-iron construction designed for high-speed, multi-axis production turning. Here is what to inspect on used units.
Test both spindles thoroughly. Measure runout at each spindle nose and test across the full RPM range. Verify C-axis positioning accuracy and holding torque on both spindles. On sub-spindle models, test the part handoff for reliable, repeatable transfer.
Cycle all turrets and live tooling stations. Index each turret through all stations and check for smooth, positive lockup. Run every live tool position and verify speeds and torque. On dual-turret Trofeo models, test superimposition (simultaneous cutting from both turrets).
Inspect axes, guideways, and ballscrews. Test backlash on every linear axis by reversing direction and monitoring position readout. On dual-Y models, verify smooth Y-axis travel on both turrets. Check guideway condition and confirm that all servo motors respond without error.
Verify the CNC control and automation. Eurotech machines use Fanuc (iHMI, 32iT, 31i) or Mitsubishi (M80) controls depending on the model. Confirm clean power-up, axis referencing, and that stored programs load correctly. Test bar feeder, parts catcher, and automation peripherals.
Eurotech Multi-Axis Turn/Mill Centers
Rapido Series
The Rapido is Eurotech's flagship dual-Y-axis turn/mill platform with powerful main and sub-spindles (15 HP each), delivering up to 50% faster cycle times than single-turret competitors. The Rapido BMX adds a third tool in the cut for maximum material removal. Rapido machines are commonly traded on the used market and excel in firearms, medical, and aerospace production.
Trofeo Series
The Trofeo series (BMX 51 SY2, BMX 70 SY2, BMX 80 SY2) delivers 11-axis capability with dual spindles, dual Y-axes, dual C-axes, and two 15-station turrets. The 13-axis configuration adds a third turret with a third Y-axis for the most complex part geometries. Superimposition technology allows three simultaneous cutting operations.
Ultima & Diamont
The Ultima is a multi-axis automated turning center with Fanuc iHMI control, 15-position turret, and programmable parts evacuation for hands-free production. The Diamont provides versatile turn/mill capability for shops stepping into multi-axis machining.
Eurotech Stallion (B750) Series
The Stallion B750 and B620 SLY deliver heavy-duty turn/mill performance with 16-station servo turrets (up to 96 tools), integral motor-spindles rated from 34 to 54 HP, and machining lengths up to 66 inches. Fanuc 32iT controls, rigid tapping, polygon turning, and automatic tool-setting come standard. The cast-iron bed and additional guideways provide stability for heavy cuts on oil and gas, power generation, and aerospace components.
Eurotech Swiss-Type Lathes
Kobra Series
The Kobra and Kobra-X Swiss-type lathes feature Mitsubishi M80 controls, 5 HP main and 3 HP sub-spindles, guide bushing compatibility, and up to 42 live tooling positions. A hydraulic disc brake reduces bar push-back for improved rigidity. These machines serve medical, electronics, and connector manufacturing where tight tolerances on small-diameter parts are essential.
Gepard SwissTurn
The Gepard and SwissTurn lines are among the world's fastest Swiss-type CNC auto lathes with 6 to 11 axes, dual spindles, Y-axis slides, and bar capacities up to 32 mm. These machines target high-volume production of precision components with sub-minute cycle times.
Eurotech Flat-Bed & Heavy-Duty Lathes
The ATL NEOS Evo provides conventional CNC flat-bed turning with centre heights from 250 to 400 mm, swing up to 800 mm, workpiece capacity to 1,500 kg, and control options from Fanuc, Siemens, Fagor, or Heidenhain. Eurotech's heavy-duty machines handle parts up to 90,000 pounds with up to 65 feet between centers for oil and gas, rail, and shipbuilding applications.
How to Sell Your Used Eurotech
Eurotech machines hold strong resale value thanks to Italian engineering, multi-axis production capability, and consistent demand from aerospace, medical, and firearms manufacturers. Rapido, Trofeo, and Stallion models are in particularly high demand.
Resell CNC buys used Eurotech machines, every model and generation, nationwide.
- Contact us — call (844) 478-8181 or email sales@resellcnc.com.
- Free appraisal within 24 hours, no obligation.
- Accept the offer — we handle rigging, transport, and logistics.
Frequently Asked Questions About Used Eurotech Machines
Are used Eurotech machines reliable?
Yes. Eurotech machines are built with Italian precision engineering, heavy cast-iron beds, and premium components. The company provides free lifetime training and phone support to all customers.
What CNC control does Eurotech use?
Eurotech primarily uses Fanuc controls (iHMI, 32iT, 31i) on turn/mill centers and Stallion machines. Swiss-type Kobra lathes use Mitsubishi M80 controls. ATL NEOS Evo flat-bed lathes offer Fanuc, Siemens, Fagor, or Heidenhain options depending on configuration.
What should I inspect before buying a used Eurotech?
Focus on main and sub-spindle runout and C-axis accuracy, turret indexing and live tooling function, backlash on all linear axes (especially Y-axes on dual-Y models), CNC control status, and bar feeder/automation interface condition.
What does "Done in One" mean for Eurotech?
Eurotech's "Done in One" philosophy means machining a complete part in a single setup using multi-axis turn/mill technology. By combining turning, milling, drilling, and tapping with dual spindles and multiple turrets, parts that previously required three or four machines and setups are produced in one operation, dramatically reducing cycle times and handling.
What industries use Eurotech machines?
Eurotech machines serve firearms manufacturing, aerospace, medical devices (implants, surgical instruments), automotive, oil and gas, power generation, electronics (connectors), rail, and shipbuilding.
What Eurotech models hold their value best?
Rapido dual-Y-axis turn/mills, Trofeo multi-axis platforms, and Stallion B750 heavy-duty machines maintain the strongest resale values due to production capability and market demand. Kobra Swiss-type lathes also hold well. Call (844) 478-8181 for current valuations.
Does Resell CNC offer financing on used Eurotech machines?
Yes. Resell CNC offers flexible financing options to help your business acquire the equipment it needs. Contact us at (844) 478-8181 to discuss terms.
How do I sell my used Eurotech?
Contact Resell CNC at (844) 478-8181 or sales@resellcnc.com. We buy every Eurotech model nationwide, from Rapido turn/mills through Stallion heavy-duty lathes and Kobra Swiss-type machines. Free appraisal within 24 hours.