What to Look for When Buying a Used Felder or Format-4
Felder Group machines are engineered in Austria with heavy cast-iron and steel construction, precision-ground tables, and tight manufacturing tolerances. Their machines hold accuracy well over time, but used buyers should inspect key wear points before purchasing.
On CNC routers, check the spindle, bearings, and vacuum system. Measure spindle runout with a dial indicator and listen for bearing noise at operating RPM. On Format-4 profit series machines, verify that the automatic tool changer indexes reliably through every pocket. Test vacuum hold-down across the full table, as weak vacuum zones indicate worn gaskets or pump degradation.
On edgebanders, inspect the glue system, pressure rollers, and trimming units. Verify the glue pot heats correctly and applies a consistent bead. Check pressure rollers for flat spots or glazing. Run test pieces through all trimming stations to confirm clean, chip-free results.
On sliding table saws and panel saws, verify table flatness and fence accuracy. Check the sliding table carriage for smooth, play-free travel. On Format-4 kappa automatic panel saws, verify programmable fence positions against known dimensions and confirm the pressure beam clamps securely.
Format-4 CNC Machining Centers
profit H08 & H10
The profit H08 is Format-4's entry-level 3-axis CNC router with flat-table nesting, automatic tool changer, and F4 Touch control. The profit H10 adds a larger work envelope, higher spindle power, and expanded tool magazine, available in nesting and pod-and-rail configurations.
profit H80 (5-Axis)
The profit H80 is Format-4's high-performance 5-axis CNC machining center for complex solid wood, composite, and panel processing, enabling undercuts, angled drilling, and sculpted 3D surfaces.
profit H200, H300 & H500
The profit H200 and H300 deliver heavy-duty industrial CNC performance with extended travel and high-torque spindles. The profit H500 is the flagship, featuring the largest work envelope in the Format-4 line, multi-spindle capability, and advanced automation.
Felder Edgebanders
tempora Series
The tempora 60.06 provides entry-level automatic edgebanding with pre-milling and end trimming. The tempora 60.08 adds flush trimming and corner rounding. The tempora 60.12 and higher models include PUR glue capability, profile tracking, and buffing units. Format-4 branded tempora models add laser-edge and hot-air technology for invisible glue lines.
Panel Saws & Sliding Table Saws
kappa Series Panel Saws
The Format-4 kappa 550 and kappa 590 automatic panel saws deliver programmable, high-precision panel sizing with automatic fence positioning, pressure beam clamping, and optimized cut planning software.
Felder Sliding Table Saws
Felder's K 940 S, K 945 S, and K 975 sliding table saws are among the most respected panel-processing saws in North American woodworking shops, known for heavy-duty carriages, precision fences, and scoring blade systems.
Planers, Jointers & Combination Machines
Felder's AD series planer/jointer combinations (AD 531, AD 541, AD 951) integrate surface jointing and thickness planing with quick changeover. The Format-4 Exact series spindle moulders serve industrial profile milling and tenoning.
How to Sell Your Used Felder or Format-4
Felder Group machines hold strong resale value thanks to Austrian build quality and global brand recognition. Format-4 profit series CNC routers and tempora edgebanders are in particularly high demand.
Resell CNC buys used Felder and Format-4 machines of every model, every generation, nationwide.
- Contact us at (844) 478-8181 or sales@resellcnc.com.
- Free appraisal within 24 hours, no obligation.
- Accept the offer and we handle rigging, transport, and logistics.
Frequently Asked Questions About Used Felder Machines
Are used Felder and Format-4 machines reliable?
Yes. Felder Group machines are manufactured in Austria using heavy cast-iron construction and rigorous quality control. The company has built woodworking machinery since 1956. Felder Group USA provides parts, service, and support from their Indianapolis facility.
What is the difference between Felder, Format-4, and Hammer?
All three brands are made by Felder Group. Hammer is the entry-level line, Felder is the professional line, and Format-4 is the industrial line. They share core engineering but differ in features, build specs, and automation.
What CNC control do Format-4 machines use?
Format-4 CNC machining centers use the proprietary F4 Touch and F4 Pro Touch control systems, supporting direct import from major CAM software. Some older models may use Siemens controls.
What should I inspect before buying a used Felder CNC router?
Focus on spindle condition, vacuum system performance, tool changer reliability, and linear guide wear. Run a test program exercising the full work envelope to check positioning accuracy.
What Felder models hold their value best?
Format-4 profit series CNC routers (especially the H08, H10, and H80) maintain the strongest resale values. Tempora edgebanders and K-series sliding table saws also retain value well. Call (844) 478-8181 for current valuations.
Where are Felder machines manufactured?
All Felder Group machines are designed and manufactured in Hall in Tirol, Austria. Felder Group USA in Indianapolis handles North American distribution and support.
Does Resell CNC offer financing on used Felder machines?
Yes. Resell CNC offers flexible financing options to help your business acquire the equipment it needs. Contact us at (844) 478-8181 to discuss terms.
How do I sell my used Felder or Format-4?
Contact Resell CNC at (844) 478-8181 or sales@resellcnc.com. We buy every Felder, Format-4, and Hammer model nationwide. Free appraisal within 24 hours.