What to Look for When Buying a Used HOMAG
HOMAG machines span CNC routers, edgebanders, panel saws, and drilling centers, each with unique inspection considerations.
On CNC processing centers, check the spindle, table, and axis drives. Measure spindle runout and listen for bearing noise at speed. Inspect the collet or HSK taper for wear. Verify vacuum table zones for proper hold-down across the full work surface. Test all axes for smooth motion and check ballscrew backlash. Cycle the tool changer through every pocket.
On edgebanders, inspect the glue system and processing units. Check the glue pot or cartridge for consistent application. Verify pressure rollers for even force without flat spots. Test trimming units (end trim, flush trim, corner rounding, scraping, buffing) for clean results. Inspect the feed chain or belt for wear causing misalignment.
On panel saws, verify blade accuracy and fence systems. Check the main blade and scoring blade for runout. Test cut quality at various speeds. Verify fence accuracy across the full travel. On beam saws, test the pressure beam for secure hold-down and the air table for smooth panel movement.
Confirm the control platform and software licenses. HOMAG machines run woodWOP programming software and the powerTouch interface. Verify the installed version and confirm all licenses transfer with the sale. Compatibility with your CAD/CAM workflow (Cabinet Vision, Microvellum, or HOMAG iX) impacts production efficiency.
HOMAG CNC Processing Centers
Centateq P Series (Nesting)
The Centateq P series (P-110, P-210, P-310, P-510) is HOMAG's flat-table nesting platform, using a vacuum table to hold sheet goods and cut, route, and drill parts in a single setup. The P-110 serves small to mid-size shops, while the P-310 and P-510 deliver multi-spindle production speed. Legacy equivalents include the WEEKE Optimat BHP and HOMAG BMG series.
Centateq N Series (Point-to-Point)
The Centateq N series (N-210, N-510, N-600) provides pod-and-rail CNC processing for drilling, routing, and grooving on workpieces held by vacuum pods, excelling at batch-one production. The console table allows loading while the machine runs. Legacy models include the WEEKE Optimat BHC and Venture series.
Centateq C Series (5-Axis)
The Centateq C series delivers full 5-axis capability for solid wood machining, staircase components, window and door frames, and architectural elements requiring angled drilling, complex profiling, and contour machining.
Legacy WEEKE & HOMAG CNC Models
Pre-rebrand WEEKE models (Optimat BHP, BHC, BHX; Venture 1, 2, 3; Vantage 33, 100, 200) and classic HOMAG (BAZ, BMG, BOF, BHX) remain widely traded. Parts availability is strong, and shops upgrading to Centateq create steady supply.
HOMAG Edgebanding Machines
Edgeteq S Series
The Edgeteq S series spans from the compact S-230 through the S-380 mid-production edgebander to the high-speed S-500 for industrial throughput. Higher-end models feature laser or hot-air edgebanding for seamless, jointline-free edges. The S-380 is one of the most popular HOMAG models. Legacy equivalents include the BRANDT Highflex, Ambition, and Optimat KDF/KDN series.
HOMAG Panel Saws & Drilling
Sawteq B Series (Panel Dividing)
The Sawteq B series (B-130, B-200, B-300, B-400) provides CNC-optimized panel dividing. Rear-loading beam saws automate material handling for high-volume operations, while front-loading models suit lower throughput. Software-driven cut optimization reduces waste. Legacy HOLZMA HPP and HPL saws remain widely available.
Drillteq D & V Series
The Drillteq D series (D-510, D-710) handles drilling, doweling, and hardware insertion. The Drillteq V series (V-200, V-500) offers vertical CNC processing with a compact footprint. Both are critical for cabinet and furniture assembly where precise hole patterns determine quality.
How to Sell Your Used HOMAG
HOMAG machines hold strong resale value thanks to global market dominance, broad installed base, and support through HOMAG North America. Centateq CNC routers, Edgeteq edgebanders, and legacy WEEKE and BRANDT models are in consistent demand.
Resell CNC buys used HOMAG machines, every model, every generation, nationwide.
- Contact us at (844) 478-8181 or sales@resellcnc.com.
- Free appraisal within 24 hours, no obligation.
- Accept the offer and we handle rigging, transport, and logistics.
Frequently Asked Questions About Used HOMAG Machines
Are used HOMAG machines reliable?
Yes. HOMAG is the world's largest woodworking machinery manufacturer. German engineering, heavy construction, and precision components deliver long service life. HOMAG North America provides parts and support for current and legacy models.
What is the difference between HOMAG, WEEKE, BRANDT, and HOLZMA?
All part of the same company. HOMAG Group acquired WEEKE (CNC routers), BRANDT (edgebanders), and HOLZMA (panel saws) over several decades. Around 2017, HOMAG unified these brands: WEEKE and HOMAG CNC machines became Centateq, BRANDT became Edgeteq, HOLZMA became Sawteq, and drilling machines became Drillteq. Used machines may carry any of these names depending on build date.
What control system does HOMAG use?
HOMAG machines use woodWOP programming software and the powerTouch interface on Beckhoff-based CNC hardware. woodWOP provides parametric, graphical part programming. Software version and license transferability are important when purchasing used equipment.
What should I inspect before buying a used HOMAG CNC router?
Focus on the spindle (runout, bearing noise, tool holder taper), vacuum table (zone integrity, pump capacity), axis drives (backlash, smoothness), and tool changer (reliable cycling). Verify woodWOP version, confirm license transfer, and check dust collection.
What HOMAG models hold their value best?
Centateq P-series nesting routers, Edgeteq S-380 and S-500 edgebanders, and WEEKE Optimat BHP/BHC point-to-point machines maintain strong resale values. Machines with current woodWOP and powerTouch controls hold a premium. Call (844) 478-8181 for valuations.
Does Resell CNC offer financing on used HOMAG machines?
Yes. Resell CNC offers flexible financing options. Call (844) 478-8181 for terms.
How do I sell my used HOMAG?
Call (844) 478-8181 or email sales@resellcnc.com. We buy every HOMAG, WEEKE, BRANDT, and HOLZMA model nationwide. Free appraisal within 24 hours.