What to Look for When Buying a Used Torchmate
Torchmate plasma tables are built as unitized, fully-assembled systems that ship ready to cut, with engineering and support backed by Lincoln Electric. A used Torchmate can deliver years of reliable production when properly maintained. Here is what to inspect.
Inspect the gantry, rails, and drive system. Check the gantry for square and confirm the rails are clean, straight, and free of plasma slag buildup. On the 5100, verify the encoded servo motors, helical gear racks, and lubrication system. On 4000 series and X Table machines, check the drive motors, gear racks, and bearings for backlash, missed steps, or unusual noise. Run the gantry through its full XY travel at rapid and feed rates.
Verify the torch height control and Z-axis. The torch height control (THC) is critical to cut quality and consumable life. Confirm the THC functions properly, the Z-axis moves smoothly, and the breakaway torch mount is intact. Inspect the torch holder, lead lines, and consumables. Check that the ohmic sensing or stand-off probe is operational depending on the model.
Check the water table or downdraft, slats, and exhaust. Confirm the table type (water table or downdraft) and inspect the water level system, pump, and drain on water tables. Check the cutting slats for excessive wear or burn-through and confirm whether replacement slats are included. On downdraft tables, verify the exhaust ducting, plenum, and any zone dampers operate correctly.
Identify the plasma source, software, and electronics. Confirm which plasma cutter is included (FlexCut 80, FlexCut 125, or an HD source) and verify hours, consumables condition, and torch lead life. Check the Torchmate CAD/CAM software license and the version installed. Verify the control PC or touchscreen boots, communicates with the table, and runs without faults.
Torchmate Plasma Table Series
Torchmate 4000 Series (4400, 4505, 4800, 4510)
The Torchmate 4000 series is the brand's most widely deployed CNC plasma cutting platform. The 4400 (4x4) and 4505 (5x5) sizes are popular in classrooms, training programs, and small shops. The 4800 (4x8) is the production workhorse for general fabrication and sign work. The 4510 (5x10) handles full 5x10 sheets and pairs with the FlexCut 125 to cut up to 1-inch mild steel.
Torchmate 5100 Flagship Industrial
The Torchmate 5100 is Lincoln Electric Cutting Systems' flagship industrial production table. Built with encoded servo motors, helical gear racks, and a lubricated gear-to-rack interface, the 5100 delivers rapid traverse speeds up to 1,500 inches per minute. The 5100 supports HD plasma sources and an optional bevel head for creating weld-ready edge prep directly off the table. It is the production choice for high-uptime fab shops.
Torchmate X Table
The Torchmate X Table is the light-industrial unitized platform. Available in 5x10 and 6x14 sizes, the X Table features a unitized design and touchscreen interface on the 5x10 models. It positions between the 4000 series and the 5100 for shops needing more capacity than the 4000 series without stepping all the way up to the 5100.
Growth Series (2x2 and 2x4)
The legacy Growth Series 2x2 and 2x4 plasma tables, introduced in 2009 as Torchmate's small-format CNC plasma platform, remain in active use in classrooms, makerspaces, gunsmithing operations, and small custom shops. These compact tables are among the most affordable CNC plasma machines on the used market.
How to Sell Your Used Torchmate
Torchmate plasma tables hold strong resale value thanks to Lincoln Electric's brand support, the unitized fully-assembled design, and broad demand from education, fabrication, and small-shop buyers. The 4800, 4510, 5100, and X Table are in particularly high demand.
Resell CNC buys used Torchmate plasma tables, every model and every size, nationwide.
- Contact us at (844) 478-8181 or sales@resellcnc.com.
- Free appraisal within 24 hours, no obligation.
- Accept the offer and we handle rigging, transport, and logistics.
Frequently Asked Questions About Used Torchmate Machines
Is Torchmate the same as Lincoln Electric?
Torchmate is a brand owned by Lincoln Electric Holdings (NASDAQ: LECO), which acquired Torchmate from Applied Robotics, Inc. in July 2011. Torchmate plasma tables are now designed, manufactured, and supported by Lincoln Electric Cutting Systems in Reno, Nevada.
What is the difference between the Torchmate 4000 series and the 5100?
The 4000 series (4400, 4505, 4800, 4510) is the general-purpose platform for education, small shops, and general fabrication, with sizes from 4x4 to 5x10. The 5100 is the industrial flagship with encoded servo motors, helical gear racks, 1,500 IPM rapids, HD plasma compatibility, and optional bevel head for all-day production cutting and weld-ready edge prep.
What plasma cutter can I use with a Torchmate?
Torchmate tables are designed to pair with Lincoln Electric FlexCut 80 and FlexCut 125 air plasma cutters or HD plasma sources. The FlexCut 125 paired with a Torchmate 4510 or larger can cut up to 1-inch mild steel. Plasma source compatibility and torch height control settings should be verified at purchase.
Are used Torchmate plasma tables reliable?
Yes. Torchmate machines are unitized systems built for plug-and-play setup. Lincoln Electric provides full-time engineering and customer support from the Reno facility, training through Torchmate University, and a network of authorized distributors across North America. A properly maintained Torchmate routinely runs for many years of production.
What should I inspect on a used Torchmate?
Gantry square and rail condition, drive motors and gear racks, torch height control and breakaway mount, water table or downdraft system, cutting slats, plasma source hours and consumables, Torchmate CAD/CAM software license, and the control PC or touchscreen. Confirm exactly what plasma source, bevel head, and software licenses transfer with the machine.
What Torchmate models hold their value best?
The 5100 flagship and 4510 (5x10) hold premium resale values. The 4800 (4x8) workhorse is in steady demand across general fabrication. Call (844) 478-8181 for current valuations on your specific Torchmate model and configuration.
Does Resell CNC offer financing on used Torchmate tables?
Yes. Resell CNC offers flexible financing options to help your shop or school acquire the equipment it needs. Contact us at (844) 478-8181 to discuss terms.
How do I sell my used Torchmate?
Contact Resell CNC at (844) 478-8181 or sales@resellcnc.com. We buy every Torchmate model and size: 4400, 4505, 4800, 4510, 5100, X Table, and Growth Series. Free appraisal within 24 hours, nationwide pickup.