What to Look for When Buying a Used Toshiba
Toshiba machines are heavy-iron production tools built for decades of service, but their size makes wear expensive to correct. Focus inspection on the spindle, ways, ballscrews, control, and parts-support path under current Shibaura Machine ownership.
On horizontal boring mills, check the spindle, ram, and W-axis squareness. Test spindle runout at the nose and at full ram extension; the difference reveals ram droop or quill wear. Cycle the W-axis through full travel and listen for binding. On BTD planer-style machines, verify column squareness and bed-way wear; on BTH table-type, exercise the rotary table and check indexing repeatability.
On vertical lathes, inspect the table bearing, cross-rail, and ram. Spin the table under power and listen for bearing growl — on a TUE or TUN this means a costly rebuild. Verify cross-rail clamp and ram squareness to the table. On twin-ram TUN machines, test both rams under load. On milling-equipped VTLs, cycle live tooling and check turret indexing.
On bridge and gantry mills, verify rail alignment and head squareness. MPF and MPC machines cover large envelopes; rail misalignment shows up as taper across long X-axis cuts. Run a test bar across full travel and check Y and Z squareness. Verify the automatic head changer if equipped and cycle the spindle through full RPM range.
Identify the TOSNUC control generation. Toshiba's TOSNUC platform spans several generations (888, 999, and current PX/Pro); parts and operator familiarity vary by version. Some BMC and later MPF machines ship with Fanuc. Confirm the platform before purchase.
Toshiba Horizontal Boring Mills
BTH Series (Table-Type HBM)
The BTH series (BTH-110, BTH-130, BTH-150) is Toshiba's signature table-type horizontal boring mill, with spindle diameters from 110 mm through 150 mm. Features include a heavy ribbed bed casting, hydrostatic guideways on larger models, programmable rotary table, and W-axis ram extension of 600 to 800 mm. The BTH-130 is the most commonly traded on the used market.
BTD Series (Planer-Type HBM)
The BTD series (BTD-110, BTD-130, BTD-150, BTD-200QF) is Toshiba's planer-style horizontal boring mill with a travelling column riding the full X-axis bed. The BTD-200QF carries a 200 mm spindle for the heaviest boring and milling on power-generation and shipbuilding components. X-axis travels on the largest BTD configurations exceed 30 feet.
BMC Series (CNC Horizontal Machining Centers)
The BMC series (BMC-100, BMC-110, BMC-130) adds full automatic tool change and optional pallet pool automation to the BTH platform, bridging HBMs and production HMCs. Tool magazines hold 40 to 120+ stations on the largest builds.
Toshiba Vertical Lathes & Bridge Mills
TUE Series (Single-Column Vertical Lathes)
The TUE series (TUE-15, TUE-20, TUE-25, TUE-100, TUE-160) is Toshiba's single-column vertical turret lathe and boring mill range, with table diameters from 1.5 to 16 meters. Standard configurations use a single ram with indexing turret; milling-equipped variants add live tooling and C-axis for part completion.
TUN Series (Double-Column Vertical Lathes)
The TUN series (TUN-30, TUN-40, TUN-50) is Toshiba's double-column vertical lathe for the largest turning work in aerospace, power generation, and large valves. Twin-ram configurations allow simultaneous machining on both sides of the part for shorter cycles.
MPF & MPC Bridge and Gantry Mills
The MPF series (MPF-2040, MPF-3060, MPF-4060) and MPC series (MPC-3050, MPC-4030) are Toshiba's bridge-type and gantry-type vertical machining centers for large die and mold work and aerospace structurals. Configurations include automatic head changers (90-degree, universal, high-speed) for heavy roughing and finishing in one setup.
How to Sell Your Used Toshiba
Toshiba machines hold strong resale value thanks to limited domestic supply and continued Shibaura Machine USA service. BTH and BTD boring mills, TUE vertical lathes, and MPF bridge mills see strong demand.
Resell CNC buys used Toshiba and Shibaura machines, every model, every generation, nationwide.
- Contact us at (844) 478-8181 or sales@resellcnc.com.
- Free appraisal within 24 hours, no obligation.
- Accept the offer and we handle rigging, transport, and heavy-iron logistics.
Frequently Asked Questions About Used Toshiba Machines
Is Toshiba Machine the same as Shibaura Machine?
Yes. Toshiba Corporation divested its stake in March 2020, and the company was renamed Shibaura Machine Co., Ltd. in April 2020. Pre-rename machines carry Toshiba badging; later units wear Shibaura. The models, TOSNUC controls, factories, and US service operations all carry through.
What CNC control does Toshiba use?
Most Toshiba machines ship with TOSNUC, the brand's proprietary CNC platform. Common generations include TOSNUC 888, 999, and current PX/Pro. Select BMC and later MPF configurations ship with Fanuc. Confirm the control to match your shop's programming and service expertise.
Are used Toshiba machines reliable?
Yes. Toshiba built its reputation on heavy-iron rigidity and precision for aerospace, power generation, and shipbuilding. Properly maintained BTH and BTD boring mills, TUE vertical lathes, and MPF bridge mills routinely deliver decades of service.
Can I still get parts for older Toshiba machines?
Yes. Shibaura Machine USA (formerly Toshiba Machine America), in Elk Grove Village, Illinois, supports the legacy Toshiba installed base with parts, service, and TOSNUC control support across major model lines.
What Toshiba models hold their value best?
BTH-130 boring mills, BTD-200QF planer-style, TUE-series vertical lathes, and MPF-3060 bridge mills maintain strong resale values. Current TOSNUC PX/Pro or Fanuc controls hold a premium over older TOSNUC 888. Call (844) 478-8181 for current valuations.
What industries use Toshiba machines?
Aerospace, power generation, shipbuilding, defense, oil and gas, large die and mold, heavy fabrication, and general heavy industry. Toshiba's strength in oversized envelopes makes the brand a default when parts exceed standard HMCs and VMCs.
Does Resell CNC offer financing on used Toshiba machines?
Yes. Resell CNC offers flexible financing options. Call (844) 478-8181 to discuss terms.
How do I sell my used Toshiba?
Contact Resell CNC at (844) 478-8181 or sales@resellcnc.com. We buy every Toshiba and Shibaura model, nationwide. Free appraisal within 24 hours.