What to Look for When Buying a Used Yamazen Machine
Yamazen machines are sourced from established Japanese builders and carry the precision and reliability Japanese machine tools are known for.
Inspect the spindle thoroughly. On CNC lathes, measure spindle runout at the chuck face and test across full RPM range, listening for bearing noise or vibration. On machining centers, check radial and axial runout at the spindle nose. Run the spindle at operating speed for 20 to 30 minutes and verify dimensional accuracy holds as the machine warms up. Spindle hour meters, where available, give useful context on wear.
Test the axis drives and ballscrews. Check backlash on all linear axes with a dial indicator. Japanese-built machines are manufactured to tight tolerances, so any measurable backlash suggests wear that may require ballscrew replacement. Verify smooth motion across full travel of each axis. On machines with linear scale feedback, confirm the scales function properly.
Cycle the tool changer and turret. On machining centers, run the ATC through every pocket and verify consistent tool-to-tool times. Listen for hesitation or misalignment during exchanges. On CNC lathes with turrets, index through every station and confirm positive lockup. Live tooling stations should spin freely and engage smoothly under load.
Evaluate the CNC control. Most Yamazen-distributed machines run Fanuc controls, the most widely supported platform in North America. Verify the control powers up without alarms, check battery backup status, and review the alarm history for recurring faults. Confirm the control version supports the G-code and M-code functionality your shop requires.
Yamazen CNC Lathes
2-Axis CNC Turning
Yamazen's CNC lathe offerings include compact and mid-size 2-axis turning centers for bar work, chucking, and general production turning. These typically feature Fanuc controls, hydraulic chucks and tailstocks, and 8- to 12-station turrets. They are valued on the used market for simple, reliable design and low cost of ownership. Many accept bar feeders for unattended operation.
Multi-Axis and Mill-Turn Capable Lathes
For shops requiring live tooling, Y-axis, or sub-spindle configurations, Yamazen has offered multi-axis turning platforms built by leading Japanese OEMs. These enable single-setup completion of complex parts, reducing handling and improving accuracy.
Yamazen Machining Centers
Vertical Machining Centers
Yamazen VMCs span table sizes and spindle configurations suited for job shop work through high-volume production. Common features include CAT 40 spindles, 20- to 30-tool ATCs, and Fanuc controls. Used Yamazen VMCs are popular with shops seeking dependable Japanese-built performance at accessible investment.
Horizontal Machining Centers
Yamazen HMCs feature built-in pallet changers, high tool capacity, and the rigidity for heavy cutting in production. These machines hold accuracy over long service lives and deliver significant production capability at a fraction of original investment on the used market.
Yamazen Specialty Equipment
Beyond lathes and machining centers, Yamazen has distributed drilling and tapping centers for high-speed holemaking, surface and cylindrical grinders for precision finishing, and wire and sinker EDM for die and mold work. These specialty machines are built to exacting tolerances and represent strong value on the secondary market.
How to Sell Your Used Yamazen
Yamazen machines are recognized for reliable performance and strong build quality, supporting consistent resale demand. CNC lathes and machining centers in good working condition are particularly sought after.
Resell CNC buys used Yamazen machines of every type, every generation, nationwide.
- Contact us at (844) 478-8181 or sales@resellcnc.com.
- Free appraisal within 24 hours, no obligation.
- Accept the offer and we handle rigging, transport, and logistics.
Frequently Asked Questions About Used Yamazen Machines
Are used Yamazen machines reliable?
Yes. Yamazen machines are sourced from proven Japanese machine tool builders known for precision manufacturing and durable construction. Japanese-built CNC equipment holds accuracy over long service lives, and Yamazen machines benefit from this heritage. With proper maintenance, they deliver years of dependable production.
What CNC control do Yamazen machines use?
The majority of Yamazen-distributed machines use Fanuc CNC controls, the most widely supported platform in North America. Some machines may use Mitsubishi or other controls depending on the original builder. Fanuc offers broad programming compatibility, extensive parts availability, and a large base of trained service technicians.
Is Yamazen a manufacturer or a distributor?
Yamazen Corporation is one of Japan's largest specialized trading companies. Founded in 1947 in Osaka, Yamazen operates a major machine tool distribution business connecting North American manufacturers with high-quality Japanese-built CNC equipment. Machines sold through Yamazen carry the quality standards of their Japanese OEM builders.
What should I inspect before buying a used Yamazen?
Focus on spindle condition (runout, bearing noise, thermal stability), ballscrew backlash on all axes, tool changer or turret function, and CNC control health. Run a warm-up cycle and cut a test part if possible. Check alarm history for recurring faults. Verify accessories (bar feeders, chip conveyors, coolant) are operational.
What types of Yamazen machines hold their value best?
CNC lathes and VMCs in good condition with Fanuc controls tend to hold resale value well. Machines with low spindle hours, clean maintenance histories, and desirable configurations (live tooling, Y-axis, pallet changers) command higher prices. Call (844) 478-8181 for current valuations.
What industries use Yamazen machines?
Yamazen machines serve automotive, aerospace, medical device manufacturing, die and mold, electronics, energy, and general contract manufacturing. The breadth of machine types available through Yamazen makes them a common presence in job shops and production facilities across North America.
Does Resell CNC offer financing on used Yamazen machines?
Yes. Resell CNC offers flexible financing options. Call (844) 478-8181 to discuss terms.
How do I sell my used Yamazen?
Contact Resell CNC at (844) 478-8181 or sales@resellcnc.com. We buy every type of Yamazen machine nationwide. Free appraisal within 24 hours.