The 2023 LNS QLS Servo 80+ is a spindle-length magazine that loads eleven- to sixty-three-inch bars from one-quarter-inch to three-and-one-eighth-inch diameter in a single four-second push, then retracts twenty-three inches on an X or Z slide so the operator can swap liners without crawling inside the lathe. Gravity-fed racks stage twenty-six-inch of stock and a servo motor with absolute encoder belts each bar forward, hitting up to four-thousand IPM advance while holding ±0.004 inch length tolerance. The ultra-light HMI stores five-hundred recipes; Ethernet e-Connect lets the CNC call the next job and logs load cycles for OEE dashboards. Automatic centreline, magazine finger and torque settings change diameter in fifteen seconds, and the full pusher swap takes under a minute—no wrenches, no shims. A vertical windowed lid lifts clear for overhead crane loading of hex, square or odd stock, while the belt-type oil skimmer and coolant gun ship standard to keep chips off hydraulics. Compared with the earlier QLS Servo 80 S2—same diameter range but manual panel and three-thousand-IPM feed—the 80+ gains the touchscreen, Ethernet part-library, four-thousand-IPM linear ways and QR-code diagnostics, yet both share identical bar range and eleven-inch minimum length so existing collets and spindle liners remain useful. MakeLNS ModelQLS Servo 80 Plus Year2023 Product #15491 Price Please login to see price. Make an Offer Get a Quote Share Ask a Question About This Machine NEVER USED! Still in factory packaging, LNS Servo 80+ Barfeeder! **All descriptions and specifications are preliminary and must be confirmed by buyer prior to purchase.** Live Tooling / Milling Specifications Bar Length: 63" Spindle Bar Capacity: 3.14" Second Spindle Tool Changer Turret Control Tailstock / Steadyrest Options Product Description: Loading Capacity (Magazine Rack): 26 inches Loading Method: Gravity-fed magazine Loading Orientation: Front or Rear Retractable Axis Options: X or Z axis retraction Retraction Travel: 23 inches HMI: Ultra-light touchscreen interface Parts Library: 500 program storage capacity Interface: Embedded PLC web server, supports Ethernet via LNS e-Connect CNC Integration: Ethernet-based selection of stored part programs (CNC must support it) Diagnostic Tools: Forecasting tools and Inch/Metric programming modes Material Shapes Supported: Round, hex, square, and irregular stock Linear Feed Rate: Up to 4,000 IPM Positioning Accuracy: ±0.004 inches Mechanical Stop: For end-loading applications Shaft Loading Mode: One-shot load cycle possible in as little as 4 seconds