The 2024 AES PRIMA 7M HSM716S Edgebander is an unused demo machine designed for cabinet and furniture shops running production edgebanding on melamine, veneer, and PVC tape. It handles edge band thickness from 0.4 to 2.0mm and panel height from 8 to 48mm at a feed speed of 12 to 16 m/min. The processing line includes dual pre-milling motors (2 x 1.8 kW at 10,000 RPM) for clean panel edges, an EVA hotmelt glue pot with a 2.5 kg capacity and 20-30 minute heat-up, dual length trimmers (2 x 0.37 kW at 12,000 RPM), dual corner rounding motors, additional top and bottom trimmers, and dual buffers (2 x 0.18 kW) for the finished edge. A lateral support rail handles large panels, an adjustable fence sets pre-mill stock removal, and a color touchscreen runs the cycle. Total installed power is 14.5 kW on 6-8 bar air. Compared to older single-feature edgebanders that only glue and rough-trim, the PRIMA 7M HSM716S runs the full premium-finish edgebanding cycle on one pass - pre-mill, glue, trim, corner-round, top / bottom finish-trim, and buff. That eliminates the manual scraping and edge-finishing time that limits throughput on lower-end edgebanders, and the dual-motor configuration on each station protects against single-point bearing failure. As a never-used demo unit, this machine is positioned as a way to step into a full production-grade AES edgebander at well below new-machine pricing. MakeAES ModelPRIMA 7M HSM716S Year2024 Product #16964 Price Please login to see price. Make an Offer Get a Quote Share Ask a Question About This Machine Stop running scrap risk through an aging edgebander or hand-finishing edges after the line - this unused 2024 AES PRIMA 7M HSM716S brings dual pre-milling, dual trimming, dual corner rounding, and dual buffing into one full premium-finish edgebander cycle, with 12-16 m/min feed, an EVA hotmelt glue pot, and a color touchscreen. Drop it on your floor and run cabinet-grade edged panels in one pass at brand-new-condition quality. **All descriptions and specifications are preliminary and must be confirmed by buyer prior to purchase.** Live Tooling / Milling Specifications Spindle Second Spindle Tool Changer Turret Control Tailstock / Steadyrest Options Product Description: - Demo Machine, Never Used in Production - Edge Band Thickness: 0.4 to 2.0mm - Panel Height: 8-48mm - Feed Speed: 12-16 m/min - Pre-Milling Motor: 2 x 1.8 kW - 10,000 RPM - Length Trimmer Motor: 2 x 0.37 kW - 12,000 RPM - Corner Rounding Motor: 2 x 0.37 kW - 12,000 RPM - Additional Top and Bottom Trimmer: 2 x 0.37 kW - 12,000 RPM - Buffers: 2 x 0.18 kW - Glue Tank Capacity: 2.5 kg - Heat Up Time: 20-30 Minutes - Lateral Support Rail for Large Panels - Adjustable Fence for Pre-Mill Stock Removal - Color Touchscreen - Air Requirement: 6-8 Bar - Total Installed Power: 14.5 kW