The Fryer VT-60 is a 60-inch-swing CNC vertical turret lathe with a reputation for large-capacity turning in a compact footprint that has made the Fryer VT series a staple in heavy job shops and production turning environments. Built by Fryer Machine Systems in the USA, this 2022 machine pairs a traveling-column design with a 60 inch maximum swing and cutting diameter, 32 inch maximum cutting length, and 34 inch X / 32 inch Z travels, turning parts up to 10,000 lbs on its 50 inch 4-jaw independent face plate. The A2-15 spindle delivers 75 HP and 10 - 500 RPM through a 2.625 inch bore, while an 8-station BMT-65 Y-axis live-tool automatic turret with +/- 3 inch Y travel, a 10 HP 4,000 RPM live spindle, and full C-axis contouring brings milling, drilling, and tapping to the vertical platform. Motion runs on 2.00 inch ballscrews with AC digital brushless servos and 750 IPM rapids, holding +/- 0.0002 inch positioning. Control is a Fryer / Siemens 828 CNC with conversational programming, and the machine includes a chip conveyor, remote handwheel, high-speed network interface, and Siemens offline software.
Compared to a conventional fixed-column vertical turret lathe, the VT-60 is a meaningful step forward. Where older VTLs dedicate a large fixed footprint to swing capacity and often limit the operator to straight turning and facing, the VT-60 traveling-column design delivers a full 60 inch swing in far less floor space, and its BMT-65 Y-axis live-tool turret with C-axis turns it into a true multitasking center capable of milling, off-center drilling, and contouring in a single setup. The modern Fryer / Siemens 828 control replaces the basic conversational or hard-wired controls found on earlier vertical lathes, adding 3D graphics, fast setup cycles, and network connectivity. For a shop that needs large-diameter turning plus live tooling without the floor space or cost of new, this 2022 VT-60 is a newer, better-equipped platform at a used-equipment value.