The Phantom T Series 48 is a 4' x 8' three-axis CNC router with the kind of simple, serviceable engineering that has made Phantom a fixture in cabinet, sign, and plastics shops. This 2022 example carries a 4' x 8' work envelope with 11.8" of Z travel under a 16.1 HP air-cooled spindle running 8,000 to 24,000 RPM on ISO30 tooling, fed by a pneumatic 8-position rack-type automatic tool changer. Work holding is a multi-zone Bakelite vacuum table with integrated T-slot clamping over an aviation aluminum alloy base, supported by the included 220V single-phase rotary vane vacuum pump, pneumatic piston reference pins, and automatic pinch rollers delivering 600 lbs of force per roller. Motion runs on linear guideways on the X and Z axes, a linear guideway on Y, a Z-axis ball screw, and 1.25M Taiwan J&T rack and pinion under dust covers, all driven by Delta 750 watt servo motors and drives. The NK-280B hand pendant control handles programming and setup with a touch probe for tool length and Z-axis work coordinate, while an oil-mist system cools the cutters. The fully welded steel frame measures roughly 134" x 84" x 85" and runs on 220V single-phase 3-wire 60Hz 50A power, so it installs in a standard shop without a three-phase service. Measured against Phantom's Atomic Series, the T Series 48 is the heavier-duty machine in the same family and the one built for continuous nesting work. The Atomic runs a 12 HP air-cooled spindle and 9 inches of Z travel; the T Series 48 steps up to 16.1 HP and 11.8 inches, the difference between clearing 3/4 sheet stock and clearing a thick glue-up or a fixture sitting on the table. Where the Atomic relies on manual pinch rollers, this machine adds automatic pneumatic rollers, so loading and holding a full sheet stops being a two-hand job. Control is the other jump: the Atomic is driven by the HC-203C hand controller, while the T Series 48 pairs the NK-280B pendant with its ISO30 8-position pneumatic changer so a multi-tool nested program runs start to finish without stopping for a manual tool change. For a shop stepping up from an entry-level router, that combination is a real production gain, not just a newer serial number. MakePhantom ModelT-Series-48 Year2022 Product #17379 Price Please login to see price. Make an Offer Get a Quote Share Ask a Question About This Machine The nested cabinet job you keep quoting three days out could be cutting tonight: 4' x 8' of multi-zone vacuum hold-down, 11.8 inches of Z clearance, and a 16.1 HP spindle that pulls its own tools from an 8-position changer while you work the next quote. It is a simple, field-proven platform on a fully welded steel frame and standard 220V single-phase power, so you can drop it in, dial it once, and trust it to run full sheets shift after shift. **All descriptions and specifications are preliminary and must be confirmed by buyer prior to purchase.** Live Tooling / Milling Specifications Vertical Table / Pallet Size: 48" x 96"" X-Travel: 48.00" Y-Travel: 96.00" Z-Travel: 11.80" Spindle Spindle Taper Type: 30 Taper Spindle Taper - Other: ISO30 Spindle Speed: 24,000 RPM Spindle Motor: 16.1 HP Second Spindle Tool Changer Tool Magazine Capacity: 8 Turret Control Control Make/Model: NK-280B Control Options: Manual Pulse Generator / Pendant Tailstock / Steadyrest Options Product Description: Multi-Zone Bakelite Vacuum Table with T-Slot Clamping Aviation Aluminum Alloy Vacuum Table Base Rotary Vane Vacuum Pump Included, 220V Single Phase 30 Amp Pneumatic Linear Rack Type Automatic Tool Changer Automatic Pneumatic Rollers, 600 lbs Force Per Roller Pneumatic Piston Reference Pins Fully Welded Steel Frame Air-Cooled Spindle Oil-Mist Tool Cooling System Linear Guideways on X and Z Axes Linear Guideway on Y Axis Ball Screw Z Axis Rack and Pinion Drive, 1.25M Taiwan J&T, with Dust Cover Delta 750 Watt Servo Motors and Drives Electrical: 220V 1PH 3 Wire 60HZ 50 Amp