The Haas TRT210 is a dual-axis trunnion rotary table with a reputation for simple setup and dependable performance that has made Haas rotaries a staple in job shops adding 5-axis capability to their vertical machining centers. This 2022 unit pairs a tilting A-axis with a rotary B-axis on an 8.3 inch (210 mm) platter with six T-slots at 60 degrees, a 300 lb maximum platter load and a 12 inch maximum part swing at a 9 inch center height. The A-axis is rated for +/-120 degrees of tilt at up to 50 degrees per second with 300 ft-lbf of torque, while the B-axis rotary is rated for 60 degrees per second and 210 ft-lbf, with 0.001 degree indexing resolution and 10 arc-second repeatability on both axes. The table runs off the host machine's CNC control rather than a standalone rotary controller, so its positioning is programmed directly in the mill's part program, and the unit weighs approximately 735 lbs. Compared with the Haas HRT210, a single-axis 4th-axis rotary table built around the same 210 mm platter size, the TRT210 adds a full tilting A-axis, so a part can be presented to the spindle at compound angles and machined on five sides in one setup instead of being refixtured between operations. It is also part of the current TRT generation that followed Haas's earlier TR210 trunnion, giving shops the newer design on the familiar 210 mm platform. Fewer setups mean fewer fixtures, less handling and more consistent feature-to-feature relationships, so for a shop moving from 4th-axis indexing to five-sided work, the TRT210 is a meaningfully better rotary, not just a newer one. MakeHaas ModelTRT-210 Year2022 Product #17604 Price Please login to see price. Make an Offer Get a Quote Share Ask a Question About This Machine Every part that needs a second, third or fourth setup is spindle time and margin you never get back - this Haas TRT210 dual-axis trunnion is built to give a vertical machining center a tilting and rotating platform that reaches five sides of a part in a single clamping. Built on Haas's simple, dependable rotary platform with parts and service support nationwide, it gives your shop a trusted way to take on complex multi-sided work without buying a whole new machine. **All descriptions and specifications are preliminary and must be confirmed by buyer prior to purchase.** Live Tooling / Milling Specifications Rotary Table / Trunnion: 5th Axis Trunnion Axis Diameter: 8" Spindle Second Spindle Tool Changer Turret Control Tailstock / Steadyrest Options Product Description: Max Weight on Platter 300 lbs Max Part Swing 12" Center Height 9" (6) T-Slots at 60 deg A-Axis (Tilt): +/-120 deg, 50 deg/sec, 300 ft-lbf B-Axis (Rotary): 60 deg/sec, 210 ft-lbf Indexing Resolution 0.001 deg, Repeatability 10 arc-sec Approx. Weight 735 lbs Workholding Not Included