2014 Mazak Integrex i-100 Multi-Tasking CNC Lathe

The Mazak Integrex i-100 is a multi-tasking CNC turning center built for shops that need turning, milling, and 5-axis contouring handled in a single setup — a machine with a proven track record of reducing cycle times and eliminating fixture changes in production environments. This 2014 unit runs on a Mazatrol Matrix 2 control and features a 15 HP main spindle turning at up to 2,000 RPM through an 8-inch hydraulic chuck, with a spindle bore of 4.4 inches and bar capacity of 4.0 inches. The work envelope covers travels of 17.72 inches in X, 8.27 inches in Y, and 35.59 inches in Z, with a maximum swing of 20.87 inches and a maximum turning length of 33.62 inches. A 12,000 RPM milling spindle with 10 HP and 240 degrees of B-axis travel provides full contouring capability, supported by a 36-position KM tool magazine. The machine is equipped with a 5-axis machining package, chuck air blast, and tool radius compensation for 5-axis work (G41.5/G42.5). The Integrex i-100 represents a significant step forward from the earlier Integrex 100-series machines — specifically the Integrex 100-IV and 100-IIISY models that preceded it. Where those machines relied on the older Mazatrol Matrix or 640MT controls, the i-100 runs the Mazatrol Matrix 2 with faster processing, improved conversational programming, and enhanced 5-axis interpolation. The i-series also introduced a more rigid machine platform with improved thermal stability, tighter positioning accuracy, and a redesigned milling spindle that delivers smoother surface finishes at higher speeds. For a buyer comparing used multi-tasking options, the i-100 is not just a newer nameplate — it is a meaningfully better machine that translates directly into tighter tolerances, shorter cycle times, and fewer rejected parts.