The 2023 Tsugami M08SY-II is a sub-spindle, Y-axis CNC turn-mill center built for complete done-in-one production of bar-fed parts up to 2.56 inches in diameter and an 11.02 inch turning capacity. It pairs an 8 inch main spindle and 6 inch back spindle, both turning to 4,500 RPM, with a 12-station Y-axis turret carrying live tooling to 5,000 RPM, so turning, milling, drilling, and cross-work run in a single cycle. With a JIS A2-6 main spindle nose, a 2.87 inch bore, and the Fanuc 0i-TF control, it is configured to finish complete parts off the bar with main-to-sub transfer and no secondary operations.

Compared to a single-spindle Tsugami M08 turning center without the S and Y options, this SY-II configuration adds a synchronized sub-spindle and a programmable Y-axis, turning a straight turning center into a full multitasking cell. That means back-working, off-center milling, and complete part transfer in one setup, where the simpler configuration would need a second machine or manual refixturing.

MakeTsugami
ModelM08SY-II
Year2023
Product #17048
Price Please login to see price.

Make an Offer Get a Quote Ask a Question Add to Comparison Added

About This Machine

A 2023 Tsugami M08SY-II drops onto your floor ready to turn finished parts straight off the bar, with a synchronized sub-spindle, a programmable Y-axis, and a 12-station live-tooling turret all working together so a complete component comes off the back spindle while the next one starts up front. For a shop chasing high-mix, tight-tolerance small parts, this is the difference between running a single operation and running the entire part complete in one cycle.

**All descriptions and specifications are preliminary and must be confirmed by buyer prior to purchase.**

Live Tooling / Milling

C-Axis: Equipped With

Y-Axis: Equipped With

Live Tooling / Milling: Equipped With

Specifications

X-Travel: 8.70"

Z-Travel: 15.75"

Distance Between Centers: 20"

Max Turning / Cutting Length: 14.96"

Max Cutting / Turning Diameter: 11.02"

Rapid Traverse: 945/1062 IPM

Spindle

Bar Capacity: 2.56"

Chuck Size: 8.0"

Chuck Type: Collet

Chuck Description: Royal QG-65 Dead-Length Collet System (Main and Sub-Spindle); Royal Round Smooth Collet

Spindle Bore: 2.87"

Spindle Speed: 4,500 RPM

Spindle Motor: 15 HP

Spindle Nose: A2-6

Second Spindle

Total Spindles: 2

Sub-Spindle: Equipped With

Second Chuck Size: 6.0"

Second Spindle Speed: 4,500 RPM

Second Spindle Motor: 10 HP

Second Spindle Nose: 140 Flat

Turret

Single Turret: Equipped With

Single Turret Live Tooling: Equipped With

Tool Positions: 12

Live Milling Max RPM: 5,000 RPM

Control

Control Make/Model: Fanuc 0i-TF

Tailstock / Steadyrest

Options

Machine Options: Barfeed Interface

Additional Machine Specs: Y-Axis Travel: 3.94"
Sub-Spindle (W-Axis) Stroke: 19.92"
Distance Between Spindles: 20"
LNS Hinge-Type Chip Conveyor, Right Hand
Live Tool Drill Holder Bore: 1.57"
Live Tool OD Shank: 25 mm sq (.98")

Chip Removal: Chip Conveyor

Barfeeder Make/Model: Edge Rebel V-65 Servo Bar Feeder