The DMG Mori NZX1500/800SY2 is a twin-spindle, twin-turret multi-axis turning center built for the precise, high-volume production of complex small-diameter parts. This 2020 unit pairs a main spindle and a counter spindle, each rated at 6,000 RPM, with two 16-station turrets that carry live tooling and Y-axis travel, plus C-axis on the spindles for milling, drilling, and tapping in one setup. Its work envelope offers an 11.8" max turning diameter, 31.9" max turning length, 8.3" X-axis travel, 4.3" Y-axis travel, and 31.9" Z-axis travel, with a 2.05" (52 mm) bar capacity and rapid traverse rates of 1,181 / 787 / 1,968 ipm on X / Y / Z. Control is DMG Mori CELOS on the ERGOline operator panel. The machine is equipped with Hainbuch collet systems (Spanntop mini 52, Topplus 40, and Topplus 26 mini), Lyndex-Nikken SK16 live and static tooling with approximately 8 live tool holders and 2 double-sided holders, an LNS Turbo chip conveyor, an LNS Chipblaster V-40 high-pressure coolant system with chiller, and an ATS bar feeder, making it a complete bar-fed cell for done-in-one turning and milling. Approximate machine weight is 18,298 lbs.
The NZX series succeeded the Mori Seiki ZT twin-turret production lathes, such as the ZT1500Y, and the NZX1500 moved the concept forward in several concrete ways. DMG Mori designed the NZX around a thicker, more rigid bed and an octagonal ram construction for the turret Y-axis, a turret layout that keeps chips from collecting under the second turret, and BMT built-in motor turret milling for stronger, smoother live-tool cutting. The 2020 build also brings the CELOS app-based operating system on the ERGOline panel, a major step up in usability over the conventional MAPPS-era interface of older units. For a buyer, that means a more rigid, more capable, easier-to-run production lathe, not just a newer one, and the ability to finish more parts complete in a single cycle.