The Doosan Puma GT3100L is a long-bed, 2-axis CNC turning center built on the heavy-duty, box-guideway PUMA GT platform, a design that has made it a dependable choice for job shops and production floors turning shafts, bar work and long parts. This 2018 unit is equipped with a 12-inch hydraulic 3-jaw chuck, 4.0-inch bar capacity, an 18.9-inch maximum turning diameter and a 50.2-inch maximum turning length. Axis travels are 10.2 inches in X and 53.1 inches in Z, with rapid traverse rates of 945 ipm in X and 1,181 ipm in Z. The main spindle is rated for 2,800 RPM and 47 HP maximum output, giving the GT3100L the power reserve for heavy roughing in steel and cast iron. A 12-station turret carries the tooling, while a tailstock and a 15-inch hydraulic steady rest support long, slender workpieces. A tool presetter shortens setup and offset work, a chip conveyor keeps the work zone clear, and the Doosan Fanuc i Series CNC control with the Doosan Easy Operation Package gives operators a familiar Fanuc programming environment with an operator-friendly panel.
Compared with earlier generations of Doosan PUMA 12-inch turning centers, the PUMA GT series was a ground-up redesign. Doosan engineered the GT platform around a rigid box guideway structure, spindle power it rates as the highest in its class, faster rapid traverse and a more user-friendly operation panel with simplified maintenance functions. On the GT3100L that translates into 945 / 1,181 ipm rapids, 47 HP at the spindle and more than 50 inches of usable turning length on a single long bed. For a shop stepping up from an older PUMA or a shorter-bed lathe, the GT3100L delivers more cutting power, less non-cut time between operations and the capacity to take on longer, heavier work - a meaningful step up, not just a later model.