The Okuma Genos L300-MYW-e is a Y-axis CNC lathe with a reputation for rigidity and long-term dependability that has made the Genos L series a staple in job shops and production turning departments. This 2019 multitasking turning center combines a main spindle, a sub-spindle, a Y-axis, full C-axis contouring, and a 12-station live tool turret, so turned parts can be milled, drilled, tapped, and back-worked complete in a single cycle. The machine offers a 20.47 inch swing over bed and an 11.81 inch maximum turning diameter, with X 9.25 / Z 18.11 inch travels, 3.94 inch of Y-axis travel for off-center milling and drilling, and 20.47 inch of W-axis travel on the sub-spindle. The main spindle is rated at 3,000 RPM and 20 HP with an A2-8 spindle nose, a 3.15 inch spindle bore, and a 10 inch 3-jaw chuck. The opposing sub-spindle is rated at 6,000 RPM and 10 HP with a 2.09 inch bore for part transfer and back-side operations. Live tooling on the turret runs to 4,500 RPM for milling, cross drilling, and tapping. The machine is run by the Okuma OSP-P300LA-e control from the OSP suite, Okuma's own in-house control platform, so the machine, drives, and CNC are engineered and supported by a single builder.
The Genos L300-MYW-e builds on Okuma's earlier Genos L300-MY and Genos L300-MW lathes, which split Y-axis milling and sub-spindle capability across two separate models. The MYW configuration unites both on one machine, so a shop no longer has to choose between off-center milling and done-in-one back-working. Compared with the earlier Genos L300-MYW running the OSP-P300L-R and OSP-P200 series controls, the -e generation moved to the OSP-P300LA-e control, which Okuma introduced to speed up control processing, improve operating performance, and extend control battery life. The result is a more capable, more efficient version of a proven platform, giving buyers fewer setups, less part handling, and more finished parts per shift from a single compact turning center.