2006 Kingston LD50-200 CNC Lathe with Big Bore

Back to List

2006 Kingston LD50-200 CNC Lathe with Big Bore

The Kingston LD50-200 is a heavy-duty CNC flat-bed hollow spindle lathe built by L&L Machinery in Taiwan, a design known for the rigid, simple construction that has made big-bore lathes a staple in oil country, pipe, valve, and heavy shaft shops. This 2006 LD50-200 offers 50 inches of swing over the bed and 200 inches between centers, with a 14.5 inch hole through the spindle on an A2-20 spindle nose and a spindle speed range up to 300 RPM. Two 32 inch 4-jaw hole-thru chucks are mounted front and rear, allowing long pipe and tubing to be gripped at both ends of the headstock for threading and end prep. A Fanuc 0i-TC CNC control rides on a swiveling pendant with a remote MPG handwheel for setup at the work. The programmable cross slide carries a front-mounted tool post, and a hydraulic tailstock with a rotating quill (MT6) uses push-button controls for positioning and quill advance and retract. Long-part support comes from a 22 inch capacity steady rest and a 12 inch capacity steady rest. A Jorgensen full-length chip conveyor, full-length splash guard, and sliding front splash and chip guard round out the package. Approximate machine weight is 50,600 lbs.

Compared with Kingston's manual HG-series oil country lathes, the CNC LD50-200 is a major step forward for production threading and contouring. Where a manual big-bore lathe depends on handwheels, change gears, and operator skill for every thread and taper, the LD50-200 is designed to run programmed threads, tapers, and profiles through the Fanuc 0i-TC, repeating them part after part. The programmable cross slide replaces manual feed work, the hydraulic tailstock removes the effort of positioning a heavy quill by hand, and the dual front and rear chucks support long tubulars without extra fixturing. The result is a machine built to shorten setup time, reduce dependence on a single skilled operator, and handle large-diameter pipe and shaft work with CNC consistency.
  • MakeKingston
  • ModelLD50-200
  • Year2010 or older
  • Product #17748
  • Price Please login to see price.

About This Machine

Pipe threading, coupling work, and long shaft jobs you once had to turn away can come straight onto your floor with 14.5 inches of hole through the spindle and 200 inches between centers. This Kingston pairs a straightforward Fanuc 0i-TC control with a heavy flat-bed build and front and rear chucks, giving your shop a simple, dependable way to bring oil country and large-diameter turning in-house.

**All descriptions and specifications are preliminary and must be confirmed by buyer prior to purchase.**

Live Tooling / Milling

Specifications

Distance Between Centers: 200"
Max Swing Over Bed: 50.00"

Spindle

Chuck Size: 32.0"
Chuck Description: (2) 32" 4-Jaw Hole-Thru Chucks, Front and Rear
Spindle Bore: 14.50"
Spindle Speed: 300 RPM
Spindle Nose: A2-20

Second Spindle

Turret

Control

Control Make/Model: Fanuc 0i-TC
Control Options: Manual Pulse Generator / Pendant

Tailstock / Steadyrest

Tailstock: Equipped With
Steadyrest Capacity: 22"

Options

Machine Options: Big Bore;Splash Guards
Additional Machine Specs: Jorgensen Full-Length Chip Conveyor
22" Capacity Steady Rest
12" Capacity Steady Rest
Hydraulic Tailstock with Rotating Quill
Programmable Cross Slide with Front-Mounted Tool Post
Swiveling Pendant-Mounted Control with Remote MPG
Sliding Front Splash and Chip Guard
25.6" Center Height
9-300 RPM Spindle Speed Range
16.5" Cross Slide Width
37.4" Carriage Width
Push-Button Tailstock Positioning and Quill Advance/Retract
Full-Length Splash Guard
Chip Removal: Chip Conveyor