2014 Mazak Vortex e-1060-V/8 CNC Vertical Machining Center

The 2014 Mazak Vortex e-1060-V/8 is a simultaneous five-axis vertical center whose twin 39.4 in pallets swing into position in nine seconds, giving uninterrupted machining for aerospace rings, mould bases or energy hubs. A 50 hp 10000 RPM CAT 50 spindle rides cooled ball screws and Heidenhain scales that hold 0.0002 in linear accuracy across 73.82 in x 41.73 in x 52.95 in travels, while the roller-cam B-axis tilts minus-30 deg to plus 120 deg and the direct-drive C-axis contours 0.001 deg for true five-side processing.? Super-flow V8M pumps coolant through the spindle at 1000 PSI so indexable drills push through Inconel in a single peck; air wash and conveyor shower clear chips before the pallet shuttles out. Linear rapids of 1653 IPM and table rotations of 30 RPM in B and 18 RPM in C compress non-cut time.? Compared with Mazak’s Vortex V-800-V (two-pallet 31.5 in table, 40 hp spindle, 59 in X stroke), the e-1060-V/8 stretches X travel to 73.82 in, raises payload from 3300 lb to 4784 lb, doubles tool capacity from 60 to 120 and adds 1000 PSI coolant, delivering heavyweight capacity on the same Matrix 2 interface.