The 2018 Haas VF-3YT is a 3-axis CNC vertical machining center built around a 48 x 18 inch worktable and 40 x 26 x 25 inch X/Y/Z travels. It runs an 8,100 RPM CAT40 spindle driven by a 30 HP vector motor, paired with a 20+1 side-mount tool changer, 710 ipm rapids, and the Haas Next Generation Control. The extended 26 inch Y on this YT variant gives the operator full coverage of larger fixtures, multi-part setups, and tombstones that simply will not fit on the standard VF-3. Compared to the earlier Haas VF-3 with its 20 inch Y, this YT adds 6 inches of front-to-back travel and pairs it with the modern NGC control that replaced the older Haas CNC platform. Buyers stepping up from a VF-3 or VF-3SS gain the same proven Haas geometry but with extra fixture room, a more responsive touchscreen interface, and built-in support for newer probing and toolpath options. MakeHaas ModelVF-3YT Year2018 Product #17047 Price Please login to see price. Make an Offer Get a Quote Share Ask a Question Add to Comparison Added About This Machine A 2018 Haas VF-3YT walks onto your floor with 40 x 26 x 25 inches of travel, an 8,100 RPM CAT40 spindle, and the Haas Next Generation Control - room to bolt down a tombstone, real horsepower, and the extended Y-axis reach that turns a tight multi-part setup into a routine job. Drop it onto your floor and the difference in throughput shows up in the next week, not the next quarter. **All descriptions and specifications are preliminary and must be confirmed by buyer prior to purchase.** Specifications Table / Pallet Size: 48" x 18"" X-Travel: 40.00" Y-Travel: 26.00" Z-Travel: 25.00" Rapid Traverse: 710 IPM Cutting Feed Rate: 500 IPM Spindle Spindle Taper Type: 50 Taper Spindle Speed: 8,100 RPM Spindle Motor: 30 HP Spindle Nose to Table Top: 7.9" - 32.9"" Tool Changer Tool Magazine Capacity: 30.1 Tool Changer Type: Side Mount Tool Change Time: 1.6 seconds Control Control Make/Model: Haas Control Control Options: Coordinate Rotation and Scaling;Remote Jog Handle;Rigid Tapping;Spindle Orientation;Ethernet / LAN;Macros Additional Control Options: Wireless Intuitive Probing System Ready HaasConnect WiFi Connection Options Additional Machine Specs: 5 T-Slots, 5/8" x 3.5" Center Spacing Direct-Drive Inline Spindle Lifting Provision Media Display M-Code; M-130 (2) 8" Vises (15) CAT50 Toolholders (1) Tightening Fixture (1) 3" Face Mill (1) Roughing Insert Mill (1) Finishing Insert End Mill Coolant Types: Programmable Coolant Chip Removal: Chip Auger Probe Make/Model: Renishaw