Skip Navigation Links Used Okuma LT2000EX: One Program, Four Ways to Cut | Meet the Machine Details

Used CNC Machine Blog: Buying Guides, Machine Reviews & Shop Floor Insights

More than 200 years of combined experience buying, selling, and appraising used CNC equipment across our team. That depth shows up here: practical buying guides, deep dives on specific machines in our Meet the Machine series, manufacturing history and expertise in Machining Monday, and straight talk about the used CNC market in The Next Shift. Written for the people who run machine shops.

Also visit our White Paper Page for detailed reference guides on buying, selling, auctions, and other hot CNC topics and our Frequently Asked Questions Page for more information about buying and selling with Resell CNC.

Okuma LT2000EX twin-spindle CNC Lathe with Live Tooling, Meet the Machine series header
Meet the Machine

Used Okuma LT2000EX: One Program, Four Ways to Cut

What is the Okuma LT2000EX?

The Okuma LT2000EX is a twin-spindle, multi-turret CNC Lathe in the 6-inch chuck class, built with two or three turrets and offered with live tooling and a Y-Axis. Okuma lists a maximum machining size of 8.27 in diameter by 5.12 in long, 6,000 rpm on both spindles and 15 hp standard on each, with 30 hp optional. Its defining feature is programming: Okuma says the same program can run on the upper or lower turret and on the left or right spindle, with the OSP control flipping the geometry. That gives four turret and spindle combinations from one program, plus simultaneous cutting with both turrets on either spindle. On a used LT2000EX, read the turret count, the milling and Y-Axis options and the control generation before the year.

The Okuma LT2000EX has two spindles and two or three turrets, and that combination usually means programming every tool position by hand. Okuma's answer was a control that lets one program run on either turret and either spindle. That is the machine's real selling point, and it is what a used buyer should test.

Okuma writes the name as LT2000 EX, with a space. Listings, including ours, usually run it together as LT2000EX. It is the same machine either way.

Two Spindles, Two or Three Turrets

Okuma describes the Okuma LT2000EX as a twin-spindle turning center in the 6-inch chuck class in which either spindle can work with the upper and lower turrets. It is built with two or three turrets, with or without a Y-Axis. The two-turret model carries 32 tool stations and the three-turret model 48, on 16-station turrets, with a 12-station turret offered as an option.

The three-turret version was presented for EMO 2011 in Hannover, according to the Spanish trade publication Interempresas. Machinery, the UK trade magazine, described that version as an 11-axis lathe with 0.3 second tool-to-tool indexing. Okuma still lists the machine today on its current OSP-P500L control.

One Program, Four Ways to Cut

A twin-spindle, twin-turret lathe has a programming problem built into it. The same feature on the same part looks different depending on which turret cuts it and which spindle holds the part. Mirror the part to the second spindle, or move a tool to the other turret, and the coordinates change.

Okuma's answer is in the control. In a January 2026 post on the LT2000 EX, Okuma says: "The same program can run on both upper and lower turrets, as well as on the left and right spindles." It adds that "The OSP control automatically flips the geometry."

That is where the four ways come from:

Left spindle Right spindle
Upper turret Way 1 Way 2
Lower turret Way 3 Way 4

One program, written once, can run in any of the four combinations. The phrase is ours, not Okuma's, but it describes what Okuma documents. On top of those four, Okuma says the machine can cut with both turrets at once on either spindle.

What the Turrets Do at the Same Time

Okuma's brochure for the LT2000 EX describes several machining modes:

Simultaneous upper and lower cutting. Both turrets work the same part at once, including simultaneous Y-Axis work on machines that have it.
Part transfer while running. The part moves from one spindle to the other with the spindles synchronized on the C-axis, so the second operation starts without stopping.
Balanced cutting. On the three-turret machine, Okuma describes "well-balanced cycle times achieved with simultaneous machining using upper left and right turrets and lower turret."

Okuma's brochure shows a 45 percent cycle-time reduction for three turrets against two on its example part. That is Okuma's figure for its own part, not a guarantee for yours, but it shows why the turret count matters as much as the year.

Reading the Configuration

A listing that just says LT2000EX does not tell you which machine it is. Okuma builds it with two or three turrets, with live tooling for milling and with or without a Y-Axis. Those three choices, plus the spindle options, decide what the machine can do in one cycle. Confirm all of them on the machine.

Okuma's brochure gives 205 mm of X travel and 95 mm of Y on Y-Axis machines. Z travel is 700 mm on the two-turret machine. On the three-turret machine the two upper turrets each have 400 mm of Z and the lower turret runs 730 mm. Live tools run from 45 to 6,000 rpm at 5.5 kW.

The Numbers Underneath

Specification Okuma LT2000 EX
Chuck class 6 in
Swing 15.75 in (400 mm)
Max machining size 8.27 in diameter x 5.12 in (210 x 130 mm)
Spindle speed 50 to 6,000 rpm; Okuma lists 50 to 5,000 rpm for the left spindle in one configuration
Spindle nose A2-6 on the left spindle
Spindle power 15 / 10 hp (11 / 7.5 kW); 30 / 20 hp (22 / 15 kW) optional
Bar capacity 52 mm (2.04 in); 65 mm with big-bore option
Turrets 2 or 3, 16 stations each standard, 12-station optional
Tool stations 32 (two turrets), 48 (three turrets)
Live tooling 45 to 6,000 rpm, 5.5 / 3.7 kW
X / Y travel 205 mm / 95 mm (Y-Axis machines)
Rapids X 1,181 ipm, Z 1,575 ipm
Control (current) OSP-P500L

Figures come from Okuma's LT2000 EX product page and brochure. The 8.27 inch machining diameter is the number to plan around. The 15.75 inch figure is swing, and listings sometimes give it as the turning diameter.

Which Control You Are Getting

Control Where it shows up
OSP-P200L Machines from about 2011 to 2016, per trade press, forum posts and dealer listings
OSP-P200LA A 2012 dealer listing
OSP-P300LA 2019 machines, including the one on our floor
OSP-P500L Okuma's current LT2000 EX

Two Okuma features are worth confirming on any generation. The Thermo-Friendly Concept is Okuma's approach to thermal stability, which its brochure says "achieves consistent high accuracy without special coolers or excessive air conditioning." The Collision Avoidance System "stops the machine movement immediately before collision," according to the brochure, and Okuma says it works in manual, MDI and automatic modes. On a machine with two spindles and up to three turrets moving at once, that second feature is not a luxury.

On Our Floor

We have a 2019 Okuma LT2000EX CNC Lathe with Live Tooling listed with the OSP-P300LA control, two spindles at 6,000 rpm on A2-6 noses, two 16-position turrets for 32 stations, C-axis, a barfeed interface, the big-bore option and automatic tool length measurement. It is a two-turret machine. Inventory changes, so check the Okuma brand page for what is available today.

Used-Market Value

We are not going to put a price on a used LT2000EX. Asking prices are not market values, and the configurations vary too widely for one number to mean much. These are the factors that move it:

1. Turret count. Three turrets and 48 stations against two and 32.
2. Milling and Y-Axis. M, MY or neither.
3. Control generation. P200L, P300LA or P500L.
4. Spindle options. Big bore and the 30 hp high-output spindles.
5. Automation. Bar feeder, parts unloader and tool length measurement.

What to Check on a Used LT2000EX

Read the configuration. Confirm the turret count, live tooling, Y-Axis and spindle options from the machine, not the listing.

Run a part transfer. Hand a part from the left spindle to the right while both are turning and confirm it seats cleanly.

Run both turrets at once. Cut with the upper and lower turrets together and watch the waits and the synchronization.

Test the one-program promise. Run the same program on the other turret or the other spindle and measure the part.

Check the alarm history. In a 2016 CNCarena forum thread, an LT2000EX owner with a P200L control described recurring stroke-end alarms on the upper turret Y-Axis. Replies suggested causes from an axis shifting slightly as the brakes set to encoder or limit switch faults. Look for repeat alarms in the log.

Confirm collision avoidance is active. And ask about crash history, then check turret and spindle alignment.

Check the automation. Run the bar feeder interface and the parts unloader if the machine has them.

Cut a part on both spindles. Measure both operations against the print.

Who Runs One

The LT2000EX suits shops running bar and chuck parts up to about 8 inches in diameter that need both ends machined in one cycle. With two spindles and two or three turrets, a part can be turned, milled and transferred without a second setup. Machinery described the three-turret version as built for chuck, bar and shaft parts.

U.S. Parts and Service

Okuma America is based in Charlotte, North Carolina, and supports its machines through a network of distributors. Okuma builds both the machine and the OSP control, so one company stands behind both. For an older P200L machine, ask your Okuma distributor what is supported for that serial number before you buy.

Resell CNC Take

The LT2000EX earns its keep in the control, not just the iron. Count the turrets, confirm the M and Y options and the control generation, then make it prove the one-program promise: run the same program on the other turret and the other spindle, and measure the part.

Looking for a used Okuma?

See what we have on the floor.

Every machine we sell is backed by a team with 200+ years of combined industry experience and four AMEA and CEA certified equipment appraisers on staff.

Browse Used Okuma

Frequently Asked Questions

What is the Okuma LT2000EX?

The Okuma LT2000EX is a twin-spindle CNC Lathe in the 6-inch chuck class with two or three turrets. Okuma lists a maximum machining size of 8.27 in diameter by 5.12 in, 6,000 rpm on both spindles, 15 hp standard per spindle with 30 hp optional, and 32 tool stations on the two-turret model or 48 on the three-turret model.

What does One Program, Four Ways to Cut mean on the LT2000EX?

Okuma says the same program can run on the upper and lower turrets and on the left and right spindles, with the OSP control automatically flipping the geometry. That gives four turret and spindle combinations from one program. The machine can also cut with both turrets at once on either spindle.

How many turrets does the Okuma LT2000EX have?

Two or three. The two-turret model has 32 tool stations and the three-turret model has 48. Each standard turret has 16 stations, with a 12-station turret offered as an option.

Does the Okuma LT2000EX have live tooling and a Y-Axis?

Okuma offers the LT2000 EX with live tooling for milling, with tools running from 45 to 6,000 rpm, and with or without a Y-Axis, which gives 95 mm of Y travel. Confirm both on the machine, because the model name alone does not show them.

What is the bar capacity of the Okuma LT2000EX?

Okuma lists 52 mm (2.04 in) as standard, and 65 mm with the big-bore left spindle option.

What control does the Okuma LT2000EX use?

It depends on the year. Dealer listings show the OSP-P200L on machines from about 2011 to 2016, the OSP-P200LA on a 2012 machine and the OSP-P300LA on a 2019 machine. Okuma's current LT2000 EX ships with the OSP-P500L.

When was the Okuma LT2000EX introduced?

The three-turret LT2000 EX was presented for EMO 2011 in Hannover, according to Spanish trade publication Interempresas. Okuma still lists the machine today.

What should you check on a used Okuma LT2000EX?

Confirm the turret count, milling and Y-Axis options and control first. Then run a part transfer between spindles, run both turrets cutting at once, check the Collision Avoidance System is active, review the alarm history for stroke-end alarms, check the bar feeder interface and parts unloader, and cut a part on both spindles.

About the Author

About Resell CNC

Resell CNC has bought and sold used CNC machinery since 2008. Based in Maitland, Florida, with warehouses in Winter Springs and Longwood, the team brings more than 200 years of combined industry experience and four AMEA and CEA certified equipment appraisers on staff. Resell CNC has been an MDNA member since 2009 and is the only used CNC dealer in North America with Official Mazak Trade-In Center status.

Sources

  1. Okuma America, LT2000 EX horizontal turning center product page, okuma.com.
  2. Okuma America, Intelligence at the Heart of Every Part: Okuma LT2000 EX, okuma.com blog, January 13, 2026.
  3. Okuma, LT2000 EX brochure, July 2025.
  4. Interempresas, Okuma LT2000 EX with three turrets at EMO 2011, July 13, 2011.
  5. Machinery (UK), Okuma 11-axis lathe machines chuck, bar and shaft parts, machinery.co.uk.
  6. Manufacturing News, Multifunction Twin-Spindle Lathe With Compact Platform, July 2015.
  7. Gosiger, An Inside Look at Okuma America's Charlotte, NC Facility, gosiger.com.
  8. CNCarena forum, Okuma LT2000EX problems thread, 2016.
  9. Dealer listings for 2011, 2012 and 2019 Okuma LT2000EX machines: exapro.com, surplex.com, surplusrecord.com.
  10. Resell CNC, 2019 Okuma LT2000EX CNC Lathe with Live Tooling listing, product 16932.
Want More Information?

Reader Comments

Have something to add? Comment on this post.

* Required Field
Send My Comment

"Resell CNC Auction's commitment to working with my schedule and needs was the reason I went them"

Brian, Texas

"Hands down, Resell offered me the best customer service experience I have ever received, and the next time I need a CNC machine, they will be the first number I call!"

Karl, North Carolina

"Love working with Resell CNC. They go out of their way to find the right machine and get you the best possible price. "

Sam, Oregon

"We called in Resell CNC to help us consolidate our east and west coast operations into one. They did a great job and would definitely do business with them again."

Scott, Florida

"I buy a lot of used equipment, Resell is one of the best company I've dealt with."

Kevin, Minnesota

"They made the process very easy and took care of all the details involved. All we had to do is give them the details on where to wire the money."

James, Michigan

"Working with these guys is awesome."

Sam, Oregon

"We exclusively use Resell CNC and give them the highest of recommendations!"

Bob, Alabama

"Best in the business for used CNC machine tools."

Carl, Georgia

"The best used CNC dealer out there!"

Andy, Connecticut

"Resell CNC made the process so easy for us. They were able to answer all of my questions with courtesy and warmth, and I wanted to to say how much I appreciated that. We could not have had a better experience. "

Rosanne, Massachusetts

"Great company to work with as an equipment supplier."

Andy, Florida

"Resell CNC is a great company to work with. Honest and fair which is hard to come by these days."

Bud, Arizona

"They got me almost double what any other dealer would have! I could not be happier with the results of our business and I would strongly recommend Resell CNC"

Robert, Kansas

"We needed a partner that could meet our time constraints, while still maximizing the value of our surplus assets. Resell CNC delivered for us, with transparency throughout the process, and clear commitments that were followed through. Highly recommended."

Buddy, Texas

"They are very professional, ethical and pleasant to work with. I highly recommend them."

Dan, California

"Resell CNC is focused on meeting their customer's conditions of satisfaction."

Keith, California

"Your team did exactly what they said they would do and it was a pleasure working with Resell CNC."

Nick, Ontario, Canada

" It was a pleaseure working with Resell CNC. I appreciate that Resell kept in constant communication, and explained the entire sales process in a simple and honest manner. "

Jim, Kentucky

"Every concern I had was addressed, and every aspect of the transaction was handled with a level of professionalism, not often seen."

Robert, Florida

"Resell CNC was on top things and even sent payment for our machines on the same day they were sold."

Gary, Ohio

"Resell CNC worked hard over several months to sell these machines and they kept me posted at every step of the way. "

Edward, Florida

"We will continue to use Resell CNC for all our used equipment purchases "

Gil, Massachusetts

"We would like to say thank you to Resell CNC for the amazing experience! We could not have asked for a smoother transition for the purchase of two CNC machines."

Monica, Ohio

"I wanted to tell you that we really had a great experience working with Resell CNC. They made everything go very smoothly and he kept me updated on every single step of the process. It was honestly a pleasant transaction."

Chad, Michigan

" Our work together was pretty seemless and it was great doing business with Resell CNC. If we are ever in the market again Resell CNC would be my preferred dealer."

Simon, Texas

"Resell CNC handled everything with great professionalism. You made the process very much stress free and that means a great deal to our company. All in all it was an enjoyable experience."

David, Texas

"Resell CNC couldn't have been better to deal with. They was knowledgeable in this area and knew what type of machine I was looking for. "

Spencer, New York

"Had a GREAT experience with Resell CNC. They were able to sell and move my machine quickly. Thanks guys!"

Kristen, Florida

"We bought a VF-3SS under an extremely tight deadline for a project."

Ben, Alabama

"I have been a little skeptical in the past about purchasing used equipment but this transaction has been a very good experience. The information given to me and the communication throughout this process has been outstanding."

Mark, Florida

"We purchased a HAAS VF-5 from Resell CNC and had a great experience. Everything taken care of from setting up with financing to shipping."

Matt, New York

" The machine has been running nonstop since it arrived and we are ecstatic. I am glad I took the call and took the leap of faith with Resell CNC"

Mike, Missouri

"Having spoken with a number of used equipment dealers, there have been some shady ones. I can happily say that Resell CNC does not fit that category."

Ben, Montana

"Resell CNC handled the entire transaction with the utmost professionalism. We are looking forward to more business together in the future. "

Roy, Ohio

"I just wanted to write a quick thank you note to Resell CNC for their supurb service. The whole transaction was very smooth."

Benny, Florida

"I wanted to take a moment to thank you all for an amazing job helping me sell 8 CNC machines in one of your online consignment sales. Resell CNC made this process so smooth and easy and helped me every step of the way."

Paul, Michigan

"Great company to work with, quality equipment and professional service."

Kevin , Illinois

"From the beginning, the team at Resell CNC was great to work with. They came in, looked at my shop, and gave me accurate pricing for all of my equipment. "

Joe, Illinois

"Due to the economic conditions in the coal mining industry my brother and I decided to close our shop. I recommend the people at Resell CNC if you need to liquidate or purchase machinery."

Kevin, West Virginia

"I just wanted to drop you a line and thank you for selling my Mitsubishi EDM machine. It went exactly as Resell CNC told me it would. "

Stacy, Missouri

"I highly recommend them so we hope to have other future purchases with them."

Sergio, Mexico

"Resell CNC offers integral and very professional services at all times."

Eduardo, Mexico

"Excellent service and very good management"

Daniel, Cali, Colombia

"Resell CNC has taken us step by step to make the purchase of the machine that best suits our needs and budget, your service has left us with a great shopping experience!"

Osbaldo, Mexico

" I had the pleasure of working with Resell CNC and the entire team displayed a great deal of product knowledge and made me feel very comfortable with my purchase."

Jorge, Texas

"Resell CNC made everything very clean and easy to understand and I would absolutely call upon you in the future to help my company with our CNC requirements."

Bill, California

"Thanks again for the excellent service Resell CNC provided me and feel free to use me as a reference anytime"

Brendan, Ohio

"I recently purchased a Mori Seiki live tooling lathe from Resell CNC. The process of purchasing this lathe was made so easy."

Brian, North Carolina

"I do not know what the future holds for my start-up machine shop; however, I do know that if I ever need to buy or sell a CNC machine, I will call Resell CNC first."

Ray, Connecticut

"We recently purchased a Hitachi Seiki machining center from the team at Resell CNC. The experience we had dealing with them was great."

Sean, North Carolina

"I wanted to thank Resell CNC for all their work on my purchase of a Mazak VCN-510C. From the handling, rigging and freight, Resell CNC handled it quickly and at a great price."

Jeremy, Missouri

"I found Resell CNC to be very pleasant to deal with and very willing to find the answers to my questions promptly."

Calvin, Arizona

"It has been a great experience all the way with Resell CNC. This is my second purchase from Resell CNC and there is no doubt in my mind that there will be many more to come"

Efrain, Mexico

"I would definitely use Resell CNC again for more CNC machine purchases, and I would advise anyone to do the same. Resell CNC is a great asset and they helped us avoid a costly mistakes"

Jason, Iowa

"When deciding to expand our business we looked to all of the local tool dealers in Central Florida, after visiting with all of them we felt that Resell CNC was the most dedicated"

Todd, Florida

"Being in Houston we deal with a ton of brokers out there who all claim to make things easy. Resell CNC is the first one to stand behind their word. For anyone who is buying, selling or moving machinery there is only one choice and it is Resell CNC"

Johnny, Texas

"Resell CNC was aggressive in searching for the right machine for me and prompt in responding to anything that was needed. They made the process very painless and was helpful in making everything run smoothly from start to finish. "

Chris, Missouri

"It was a pleasure working with Resell CNC on this project. I would highly recommend Resell CNC to anyone."

William, South Carolina

"I was pleased that I had the chance to pick up a quality machine like this at a good price."

John, California

"They worked very hard looking for the machine that would best fit my requirements and emailed and called me several times with some great opportunities."

Ben, Kentucky

" I found that dealing with Resell CNC was very enjoyable and that the transaction was handled in a very professional manner."

Anthony, Massachusetts

"A couple of weeks ago Resell CNC called us. I hesitated to take the call because I almost never take calls from CNC salesman; but Im sure happy I did this time! "

Steve, Georgia

"Thanks for all of your help with the purchase of my new Torchmach CNC milling machine. It was a pleasure to deal with you and I hope to do so again."

Grayston, California

"For a contract manufacturer it is invaluable to have a partnership with a company like Resell CNC who enables us to expand and contract capacity with such ease."

Ken, California

"We highly recommend Resell CNC as a one-stop source for all matters involved with the sale and purchase of CNC machines."

Calvin, California

"I find the staff to be courteous, professional, and extremely efficient. I am impressed with the knowledge of the equipment, the business and the process."

Bruce, Missouri

"It was a pleasure doing business with Resell CNC."

Luke, Louisiana

"In today's world it is great to find a company like Resell CNC that goes the extra mile to make sure there customers are happy at the end of the day! "

Dean, Illinois

"Resell CNC made sure I had a smooth and easy transaction."

Stuart, Georgia

"In todays world of fast paced transactions and high fuel costs it pays off to collaborate with an organization like Resell CNC who has machines available in all cities throughout North America and does business all over the world."

Jason, Texas

"You made the sale and transaction a pleasant experience for us."

Rodney, Tennessee

"The entire process went like a well-oil machined."

Matt, Alabama

"The sales rep received my call and was very knowledgeable about this lathe."

Delbert, Texas

"They provided a trouble free and satisfying experience. If we ever need to sell additional equipment I will certainly use Resell CNC Auctions."

Randy, Kentucky

"It was a pleasure doing business with Resell CNC. I will not hesitate to call Resell CNC again for machine tool purchases or sales."

Chuck, Florida

"I want to personally thank Resell CNC for their professional service and painless transaction of the sale of our Haas Mini Mill."

Jerome, California

"They worked hard to understand out needs and to determine exactly what we wanted and more importantly what we needed. The process went very well and very smoothly. "

Todd, Texas

"We moved forward and - to our great surprise - Resell CNC was able to find a buyer for our equipment within the first day of listing it! "

Morten, Arizona

"It has been a pleasure to work with you and Resell CNC over the past few weeks. "

Hyrum, Colorado

"We have been dealing with Resell CNC for years and they have never let us down. "

Clayton, Connecticut

"It was really an enjoyable experience working with Resell CNC. I definitely would recommend you to anyone I know looking to sale machines or buy machines in the future."

Calvin, Indiana

"I am always cautious when buying used CNC equipment and I was pleased that my salesperson mentioned that he wanted me to go and inspect the machine and his follow through was excellent."

Brian, Michigan

"I put you up against the clock, but you guys pulled it off and I am very pleased with the purchase."

Chris, Illinois

"The machine arrived in great condition and is exactly as you represented it to us."

Cleon, Canada

"Resell CNC Auctions provided me with an option for my needs, which netted me what I needed for my machines and a quick removal."

Jack, Iowa

"There is no doubt I will be using Resell CNC for all of my future sales and I will gladly recommend them to anyone I know that is looking to buy or sale a machine."

Bobby, Texas

"You made the process easy and quicker than we had anticipated. "

Yvon, Canada

"I was a little concerned when you told me you could sell the machine within a few weeks and at the price I had told you that we wanted, but you did just that."

Paul, Massachusetts

"The communication from your end was incredible and made this transaction professional and a pleasure to do business with your company."

Steve, Indiana

"You were very thorough and I appreciate the professionalism with which you worked."

Eugene, Arizona

"Everything went so well and so smoothly. I can’t believe that four days after first contacting you the machine is in my shop!"

Brad, Louisiana

"I have been in the manufacturing business for over 30 years. In these years I have bought, sold, rebuilt and modified them and I must say that after working with you and Resell CNC this past month that is how easy moving machines should be! "

Kevin, Illinois

"I knew that I wanted to buy a good quality used machine at a fair price. I worked with Resell CNC and I quickly realized that my salesperson was a hard-working and honest guy."

Jeff, Tennessee

"I would not hesitate to recommend Resell CNC to any machine shop as they are real professionals."

Terry, New York

" This was one of the easiest transactions I have made in my 30 years of manufacturing."

Jeff, Illinois

"Our sales rep was an honest and courteous salesperson (a priceless asset) and would always call back in a few minutes and have an answer to a question I had, that was worth a lot. I wish more sales professionals were just like them. Job well done!"

Jay, Ohio

"Resell CNC worked very hard and very effectively to sell my machine. I was paid quickly and the machine shipped very quickly as well."

Rick, Pennsylvania

"Resell CNC will be our first call when the need arises for us to acquire any additional equipment."

Joshua, Texas

"I cannot imagine any other machine dealer topping the service of Resell CNC. For my next machine purchase, I will call Resell CNC first."

John, Minnesota

"I would like to write to commend Resell CNC on a stellar job working with us on purchasing our Haas SL-30T. "

David, Texas

"Our sales rep at Resell CNC has been a sheer joy to work with. "

Justin, Michigan

"What was needed was a quick turnaround time to dovetail with the quicker than expected arrival of my new mill and you guys delivered. "

Dave, Tennessee

"The whole process was very simple and straightforward. They had the CNC sold within a week. Now that was fast! A++++++++"

Charles, Iowa

"They took care of every small detail, kept us updated as all on all the events as they unfolded. They made what usually is a consuming process and turned it into a rewarding experience. "

Dave, North Carolina

"This was our first used CNC machine and from this experience will probably go this route in the future. We are very pleased with our purchase and how it was handled. Thank you!"

Scott, Mississippi

"Thank you again for outstanding service. We will certainly keep Resell CNC in mind when it comes to our equipment needs, whether to sell or purchase."

Andie, Florida

"I appreciated your attention to detail when we had a problem, and your willingness to be available especially after normal business hours. That's something I have not seen from any other machinery salesperson in all of my many years in the business."

Craig, Pennsylvania

"I would recommend Resell CNC due to their friendly people and terrific customer service."

Tom, Texas

"I just wanted to say it has been a pleasure doing business with you. We will keep you in mind when we have some more machinery to sell."

Nick, New York

" I will definitely be calling Resell CNC in the future if I need any CNC equipment."

Jeff, Colorado

"I just wanted to send you a quick note to say thanks for the help and nice job! You made purchasing only my 2nd used machine quick and painless."

Kevin, Connecticut

"We are exceptionally pleased with the ease of working with you on this as well as how fast the transaction was able to take place. "

Jordan, Indiana

"It was a pleasure selling my lathe with Resell CNC. They made the process quite easy. "

Thomas, Mississippi

"The high level of sales and service provided was much appreciated during the process of buying CNC equipment. Their quick response times and accurate information expedited a traditionally cumbersome process."

Rankin, Ohio

"This is without a doubt the quickest machine sale I have ever been a part of, not to mention the easiest "

Bob, Ohio

"From the time we started communicating until when the machine arrived at our door, Resell CNC stayed in constant contact and made sure the whole process went smoothly."

Dale, Pennsylvania

"The recent purchase we made from Resell CNC was a very satisfactory transaction. The team at Resell CNC was very helpful with information concerning the machine we were interested in."

Ken, Florida

"If anyone is looking for machines to buy I recommend Resell CNC for the job!"

Bryan, Louisiana

"Resell CNC's professional standards places them in the forefront of our industry."

Imad, Ontario, Canada

"I was impressed at the attention Resell CNC gave me and my 100+ questions. They had the answers and things went just as they said they would."

Richard, Connecticut

"I would like to thank you and your associates in this transaction for the fine service we received during this transaction."

Ed, Pennsylvania

"The transaction went along very smoothly, and you followed up great. We are very happy with the machine."

JT, Wisconsin

"We will certainly be back in touch with you and Resell CNC!"

Marianne, Florida

"I would highly recommend using Resell CNC for purchasing or selling machine equipment."

Jeff, Tennessee

"We have purchased a lot of parts and equipment and have a lot of good vendors, but this was a pleasant surprise to have this unusual level of service and professionalism on this purchase."

Larry, Georgia

" We can not emphasis how impressed we were of Resell CNC's knowledge of the machine industry and how best to sell the machines while maximizing our dollar return."

Christopher, Michigan

"It was a pleasure working with Resell CNC."

Shawn, New Jersey

"We value Resell CNC as an excellent partner for our trade-in equipment"

Albert, Quebec Canada

"I have enjoyed working with the team from Resell CNC and look forward to a continued partnership as our company grows and the need for more equipment arises."

Michael, Oklahoma

"Our corporation highly recommends Resell CNC for their assistance in selling any CNC equipment your company may have to offer."

Steve, Michigan

"Thank you to Resell CNC for helping us out in our time of need. "

John, Florida

" Our experience with Resell CNC was superb. It is rare in today's business environment when we meet people who do exactly what they say they will do when they promise to do it."

Del, Oregon

"I am a firm believer of building relationships and standardization. As a result, I will continue to pursue used equipment from Resell CNC."

Richard, Illinois

"Our interactions with Resell CNC have been excellent. "

Patrick, Nebraska

"We recently purchased a used Mazak lathe through Resell CNC. The transaction went so well that I agreed to sell one of our Mazak lathes through their company. "

Pete, Missouri

"I enjoy dealing with Resell CNC and will always call them when I am buying or selling equipment in the future."

John, Illinois

"I have been in the machine shop business for about 10 years and I must say, without doubt this purchase was by far the most pleasurable to date"

Dean, Kentucky

"We had a requirement to sell 4 CNC vertical machining centers.The whole experience was first-rate."

Eric, Ontario

"Resell CNC saved me $10,000 on my last machine purchase"

Rick, Oklahoma

"We needed to make an immediate purchase and Resell CNC was the perfect fit for us."

Mark, Washington

"In today's business environment, communication is vital, and Resell CNC hit this sale out of the park."

Mark, Ohio

"I want to thank you for your time, patience and great service"

Roberto, Mexico

"I want to thank you for the sale of our three CNC machines. "

Charles, Pennsylvania

"Resell CNC made us a deal too good to pass up!"

Joseph, Texas

"Throughout the process of finalizing the purchase of the machine, Resell CNC was patient and very professional. I own a company; I would highly recommend Resell CNC to anyone in the market for a used machine."

Kevin, California